API 5L 3PE Fbe Coating LSAW SSAW Steel Pipe

API 5L 3PE Fbe Coating LSAW SSAW Steel Pipe

The company has advanced LSAW production line, with international mature JCOE production process adopted. The pipes produced according to API Spec 2B, API Spec 5L ,GB/T9711 and SY/T10002 standards, widely used for water, oil and gas transmission and various offshore steel structures.
Process:
LSAW (Longitudinal Submerge-arc Welded) UO(UOE),RB(RBE),JCO(JCOE)
DSAW (Double Submerged arc welded)
Steel Grade:
GB/T3091, SY/T5037, SY/T 5040,CJ/T 3022:Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8
API 5L: A, B, X42, X46, X52, X56, X60, X65 X70
GB/T9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555
ASTM A 53: Gr. A, Gr B, Gr C, Gr.D
BS:1387, EN10217:S185, S235,S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33, St37, St44, ST52

Size:
LSAW, DSAW:
Outer Diameter: 200mm-2200mm
Wall Thickness: 5.0mm-25.4mm
Length: MAX 12.5m
End:Plain ends (straight cut, saw cut, and torch cut). or beveled End.
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Fusion Bond Epoxy, 3LPE)
Packing:Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.

GOOD PERFORMANCE:
good thermal resistance, aging resistance, high bond strength, corrosion resistance, tear resistance, abrasion resistance,

electrical insulation, good mechanical properties, impact resistance and bending resistance.

  
 
  External 3PE Coating   

 
Internal FBE Coating

 
 

API 5L 3PE Fbe Coating LSAW SSAW Steel Pipe

The company has advanced LSAW production line, with international mature JCOE production process adopted. The pipes produced according to API Spec 2B, API Spec 5L ,GB/T9711 and SY/T10002 standards, widely used for water, oil and gas transmission and various offshore steel structures.
Process:
LSAW (Longitudinal Submerge-arc Welded) UO(UOE),RB(RBE),JCO(JCOE)
DSAW (Double Submerged arc welded)
Steel Grade:
GB/T3091, SY/T5037, SY/T 5040,CJ/T 3022:Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8
API 5L: A, B, X42, X46, X52, X56, X60, X65 X70
GB/T9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555
ASTM A 53: Gr. A, Gr B, Gr C, Gr.D
BS:1387, EN10217:S185, S235,S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33, St37, St44, ST52

Size:
LSAW, DSAW:
Outer Diameter: 200mm-2200mm
Wall Thickness: 5.0mm-25.4mm
Length: MAX 12.5m
End:Plain ends (straight cut, saw cut, and torch cut). or beveled End.
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Fusion Bond Epoxy, 3LPE)
Packing:Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps.
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.

GOOD PERFORMANCE:
good thermal resistance, aging resistance, high bond strength, corrosion resistance, tear resistance, abrasion resistance,

electrical insulation, good mechanical properties, impact resistance and bending resistance.

  
 
  External 3PE Coating   

 
Internal FBE Coating

 
 

Tempered Glass

Tempered or toughened glass is a type of safety glass processed by controlled thermal to increase its strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks instead of splintering into jagged shards as plate glass (a.k.a. annealed glass) does. The granular chunks are less likely to cause injury.

Tempered glass is often used in applications where using standard glass could pose a potential danger. Tempered glass is stronger than standard glass and does not shatter into large shards when broken. This is important, because it can greatly minimize potential danger in the case of a break. Manufactured through a process of extreme heating and rapid cooling, tempered glass is much harder than normal glass.

In the case that tempered glass does break, it shatters into small pebbles that are void of dangerous, sharp edges. As tempered glass is considered to be much safer than normal glass, you may often here it referred to as safety glass or TOUGHENED GLASS . Tempered glass has a wide variety of uses that you'll find just about everywhere. In fact, the shower doors in your bathroom or the side glass on a motor vehicle are examples of tempered glass.

Annealed glass can be processed into Clear Tempered Glass, Ultra Clear Tempered Glass, printed tempered glass, back painted tempered glass, tempered Laminated Glass, tempered Insulated Glass , tempered Vacuum Insulated Glass and so on, custom made on project request. Can be used for windows, doors, partitions, handrails, balcony, balustrade, fence, table top, decoration, kitchen splashbacks and so on.

Privacy Tempered Glass, Matte Tempered Glass,Tempered Glass Window

Shanghai Lead Glass Co.,Ltd , https://www.leadglaze.com