High-flow heat-conducting oil pump seal features
2018-05-26 11:00:59
High-flow heat-conducting oil pump seal features: (i), the large flow heat-conducting oil pump is based on the digestion and absorption of foreign oil pump developed the second generation of products, the basic structure of single-stage single-suction cantilever foot support structure, hot oil pump imports for the axial Inhalation, the outlet is centered vertically upward, and the motor is mounted on the base. (Ii), high-flow heat-conducting oil pump support the use of double-ended ball bearing structure, the front end is lubricated with grease, the rear end is lubricated with oil, the middle of a guide tubing, to observe the sealing and recovery of thermal oil. (Iii) The high-flow heat-conducting oil pump adopts a self-heating and heat-dissipating structure, which changes the traditional water-cooling structure and makes the structure simple, small in size, and saves operation cost, and has good performance and reliable use. (Iv) high flux heat pump with a combination of packing seal and mechanical seal, packing seal with high temperature filler, with good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance of cemented carbide Materials, to ensure the sealing performance under high temperature conditions. ㈤, high-flow heat-conducting oil pump uses the third generation of polytetrafluoroethylene (PTFE for short) to make the lip seal, so that the sealing performance has taken a leap forward. Compared with the rubber type, the sealing reliability is improved by 25 times and the corrosion resistance is extremely strong.
Type: Snap Hook DIN5299 Form C, DIN5299 Form D, DIN5299 Form B, DIN5299 From A, Pelican hook, S hook, Eye spring hook, Open end spring hook, Swivel head key snap
Material: Stainless steel 304 & 316
Packing: Gunny bags for big dimension, cartons for small sizes.
Used In: Factories, mines, construction sites, power plants, boat, manufacturing, engineering Lifting Machine, climbing etc.
Points for Attention in Use: Hooks and quick links should strictly conform the limited working load, over-used or over-loading is forbidden.
Advantage: Stable quality, enough products, reasonable prices
Features: Smooth surface, No crack defect, Durable & anti corrosion rust
Instruction:
1.Do not use the damaged hook rigging.
2.When lifting, do not twist rigging.
3.Do not tie a knot to rigging
4.Making sure to check before using rigging every time.
Spring Hooks,Spring Snap Hooks,Stainless Steel Spring Hooks,Stainless Snap Hooks
Ningbo Jinghong Hardware Machinery & Electric Co.,Ltd. , http://www.mwfrigging.com