Home>Bearing knowledge>What are the requirements of the bearings in the operation?

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

What are the requirements of the bearings in the operation?

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Some machines are working for 24 hours; the quality of mechanical equipment that has never stopped working is very high; if the quality of mechanical equipment is not good; it must be very simple and bad; the mechanical operation of 24 hours is not the usual operation. The mechanical equipment is acceptable. The best equipment is such that the SKF bearing is better. The quality of the SKF bearing is reliable. However, the bearing needs to pay attention to some work in the operation of the mechanical equipment; let us pay attention to some scorpions.
1. If the SKF bearing is outstandingly smooth and properly insulated from moisture and moisture, the oil seal should be free of wear. However, the best way to look at the SKF bearing is to visually view the SKF bearing and view the oil seal periodically. Look at the oil seals near the SKF bearings to ensure they are sufficient to prevent hot liquids or corrosive liquids or gases from entering the SKF bearings along the axis. The ring and labyrinth oil seals should be greased to ensure maximum protection. If the oil seal has worn out, it should be replaced quickly.
2. High temperatures often indicate that SKF bearings are already in an abnormal condition. High temperatures are also detrimental to the smoothing agent in SKF bearings. Sometimes the overheating of SKF bearings can be attributed to the smoothing agent of SKF bearings. If the SKF bearing is operated for a long time beyond the temperature of 125 degrees Celsius, the SKF bearing life will be reduced. The causes of high-temperature SKF bearings include: lack of smoothness or over-smoothness, magazines in smoothing agents, excessive load, damage to SKF bearings, lack of voids, and high temperature conflicts in oil seals.
3. It is now more and more serious to look at the situation of the machine at work and prepare a complete view. In the meantime, SKF bearings are the focus of attention, because it is the most important rotating part of all machines. Situation monitoring is an important part of preventing protection. Early detection of SKF bearing damage to prevent equipment stoppage due to non-schema protection time due to SKF bearing damage.

---

Recommend to friends comments close window

Bearing related knowledge

The effect of smoothing grease on carburized bearing steel on the life of KOYO bearing. The most comprehensive "bearing common sense" in detail on the application of anti-rust oil to avoid FAG bearing rust to deal with "common bearing damage" "small good way"

This article links to http://
Please indicate the bearing network http://

Previous:10 good methods to distinguish between authentic FAG bearings and next edition: "A detailed analysis of the matters that should be paid attention to in the environment of FAG bearing"

Impregnated Activated Carbon

Impregnated Activated Carbon,Anthracite Column Activated Carbon,Denitration Pellet Carbon,Coal Based Column Activated Carbon

NINGXIA TIANFU ACTIVATED CARBON CO.,LTD , https://www.tjfyhxt.com