China's Mould Manufacturing Quality Standards (3)

Author: Dongguan Bai Teng Die Source: Then the first two, we continue to introduce Chinese mold quality standards, finishing by the Dongguan Bai Teng injection mold company. Acceptance test sample size and mold size: The quality inspection department shall inspect the product and submit a test report. Within 24 hours of the mold test, the report shall include a comprehensive test analysis of product dimensions, appearance, injection techniques, and physical parameters. We use different products for different purposes. The inspection standards and tools are used in the laboratory of our company. We do different high pressure injection tests, high-speed injection, long-term automatic operation tests, etc. QC department gives suggestions for modification and improvement of unqualified products. Teng injection mold company has accumulated rich experience, which is conducive to mold production, for more and more customers to provide a good solution. As we continue to improve equipment and test equipment, this makes our product inspections often more professional. Acceptance of mold testing: To a certain extent, our mold testing is aimed at discovering the quality of molds. Therefore, we have many steps including air-operated, high-pressure bearings, high-speed injections, and necessary long-time injection mold inspections. Die factory inspection: According to the order documents, customer needs and company standards, we will strictly check the inspection mold, should record the inspection report. Machining process department: The technical personnel of the processing technology department should review the mold production before the modeling and arrange the mold tool. It can ensure the successful delivery of the mold in a short and reasonable delivery time, at the same time, it can avoid the problem of long production cycle and material waste. These are caused by improper handling. Processing Department: Department employees keep track of mold processing daily, collect progress photos of each mold's processing steps, and provide processing reports for the sales department. During this period, they cooperated with the project director to monitor production and processing and equipment modulation, and coordinated with various departments to arrange mold processing. This article is the original article of Yu Teng company, all rights reserved, please indicate