Five basic common sense of choosing furniture
1. Pay attention to whether there are tenons and grooves on the furniture frame structure and whether they are glued tightly. Pay special attention to whether there are broken tenons and broken materials. For concealed drawers, it is even more necessary to check whether there is a tenon slot in the drawer structure, whether there is glue applied in the tenon slot, and whether the drawer gang and the plug are connected by nails. Before buying a sofa, you should observe from the bottom of the sofa seat. If the frame only uses nail structure, no mortise and no glue is applied, it will be loose and deformed after a long time.
2. The fineness of workmanship is the key factor to distinguish the quality of furniture. For example, when purchasing a sofa or mattress, first observe whether the appearance quality is pleasant; second, check the straightness of the dental floss on the outer edge of the cloth, whether there is a jumper phenomenon; again, take a look at whether the covering used inside is outdated Cloth and dirty leather. Normal brand manufacturers have a zipper on the side of the mattress. It is best to carefully check the filling and workmanship.
3. Be alert to cross the sky. The leather surface of the leather sofa does not feel comfortable, either thin and soft or cool, or thick and dry and hard, and the gloss is not high; the leather sofa is delicate and flexible, with good hand performance, and the skin texture has a trend and high gloss. When buying solid wood furniture, you can't just look at the surface wood grain, but be careful when the veneer furniture is mixed. As long as you observe meticulously, you can find the traces of the veneer by comparing the shading lines and directions of the fitting corners or back . For some furniture with heavy paint and greasy materials, there is no wood on the surface, and all of them are inferior plates, all of which are packed with paint and greasy materials. If you buy it back home, once the paint is scratched, it will be difficult to use again. Everyone must be careful not to move the goods home. The all-inclusive sofa also has the problem of covering people's eyes and ears, so the inspection is very important, and it should be particularly understood whether the internal wood is rough, decaying or worm-etched. Turn the sofa over and take a good look.
4. Identify cut corners. For example, some furniture factories use medium-density slats and chipboard slats as load-bearing components. In some furniture, the back of the mirror is not fixed by the baffle and the bead, and only the nail is used as the supporting pin, which is very sturdy. Most of these things should be carefully checked.
5. Check the dryness of the wood in the furniture through the feel. To distinguish the wood moisture content. It is important to know that the wood is not dried or is not completely dried. The moisture content of the plates of a set of furniture varies, and the furniture is most easily deformed and deformed.
Physical Blowing Agents,Anti Sudsing Agent,Silicone Based Defoamer,Coconut Oil Foaming Agent
Jiang Xi Hi-Tech Technology Co.,Ltd. , https://www.hi-techmasterbatch.com