What are the repairs for crystal lamps? What is the crystal lamp repair method?
The crystal lamp hanging in the living room is very flattering. In people's homes, installing a crystal lamp in the living room is simply the beloved of the hostess. The use of the crystal lamp has been around for a long time, and there will be some small problems. It can damage the hostess. The crystal lamp can be repaired by professionals, and the maintenance method can be repaired. If the crystal lamp is broken, it can be repaired. Then everyone will follow the Xiaobian together to see the relevant content of the crystal lamp repair .
First, the crystal lamp repair method
1. The crystal light LED is not lit, and the light bulb can be bright. Generally, the new lamp will not have the problem of the remote control. Generally, it is necessary to check whether the lamp bead is inserted or not, and many friends will make a phone call when the LED is not bright. I don't check it myself, it may be shaken off during transportation, so this kind of classification, LED falling off, false insertion.
2. The crystal chandelier is good when it is tested underneath, and it does not light up when it is on the ceiling. This situation is generally caused by leakage of the lamp cap.
3. The crystal chandeliers are all off. Are you confused about this situation? Don't worry. The remote control is removed first, and then the LED and the lamp head are directly tested. Can it be bright? That is the remote control problem, if it is not bright or abnormal, it has to be changed.
4. The current crystal lamp generally has a segmenter, that is, the first gear is LED bright, the second is the bulb is bright, the third gear is all bright, if the first gear is bad, two possibilities, one, LED lamp beads Bad, second, the LED driver is broken. Now the LED is divided into many types. If the second gear is not bright, the bulb may be broken, or the segmenter is broken.
Second, the crystal lamp is broken, I don't know why?
I believe that my friends have encountered such problems. There are some lights in the crystal lamp in the house. It is still not possible to change the light bulb. What is the reason for this? How are these reasons caused? Friends should not worry, this In this case, the general crystal lamp will have this problem, as long as the cause is found. Here are the answers for everyone: 1. Line problems 2. Accessories problems, one by one, check one by one.
For example, there are many reasons for this problem in the line, such as the aging of the line for a long time, the quality of the lamp itself, and so on. Whether it is a low-pressure crystal lamp or a modern crystal lamp. There is only one way we deal with it, which is to conduct a comprehensive investigation of the wiring of the luminaire.
Some friends may have to ask, how do we check? How do you start? General crystal lighting lines are installed in hidden places, we are best to remove the crystal lights, everyone must pay attention to safety when dismantling, must First break the power and then start. After you have taken it down, you have to check it out.
Friends know that when doctors treat patients, they should follow the instructions, ask, smell, and cut the same way. We also do this when dealing with line faults. Our order is a look, two smells, three hands, the smell here is smelling with the nose. We first use our eyes to see where there is a burning mark. If we can't find it, we can smell it with our nose, and there is no smell of burnt residue on the line.
The reason why the large area of ​​the lamp does not shine is very likely that the line is blown. We find the burnt line and reconnect it. If we can't find it, we need to do it ourselves. One by one, if there is any loose connection between the lamp socket and the line, basically check it out in this way, and we basically eliminate the line problem.
How about, I saw the wonderful introduction to the repair of the crystal lamp. Did you know a lot about the repair of crystal lamps? I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
How to clean the crystal lamp, the brand introduction of the crystal lamp
How to make a crystal light box? Crystal light box features introduction
What is a crystal lamp? Is the crystal light good?
How much is the crystal lamp? What is the price of the crystal lamp?
Rigid Solid Body Centralizer for Casing
1. Type: Rigid Centralizer
2. Materials: Carbon Steel, Nylon, Aluminum Alloy, Zinc Alloy, or others as required
3. Standards: API, or others as required
4. Specifications: 4 1/2''---13-3/8'', or others as required
Characteristics for Rigid Centralizer :
1) Good shock, impact and corrosion resistance;
2) High tensile and yield strengths;
3) Straight or spiral blades are available;
4) Ensure positive centering in deviated or horizontal holes;
5) Prevent differential sticking while running casing;
Installation
Rigid centralizer is installed on the casing with Stop Collars or with integral set screws. Most slip-on rigid centralizers are only allowed to be installed between stop collars.
Rigid Solid Body Centralizer,Rigid Casing Centralizer,Solid Centralizer
Puyang Junhong Rubber Co., Ltd. , https://www.pyjhxs.com