What is the general interior door size?

Speaking of the door, I believe everyone is familiar with it. And what I want to introduce to everyone today is the interior door. The interior door, plainly speaking, is the general name of all room doors. The advantages of the interior doors are obvious. They have the functions of strengthening theft prevention, rationally arranging the interior space, and beautifying the living room environment. So, do you know the size of the interior doors in the average home? Next, on to tell you about.

What is the size of the interior door in a typical home?

There are many types of doors, such as doors, the standard size is about 850-1000mm, the door should be relatively large, so as to make the whole look spacious and generous. The size of the interior door is generally between 750mm-800mm, but this size is not fixed, mainly based on the actual situation. The kitchen door is generally pushed and pulled. The general size is 1400mm-1800mm-2000mm. Of course, this depends on the circumstances. If it is a toilet door, it can be smaller, generally 550mm-600mm in width.

Interior door shopping tips

1, four to see

A look at the shape and paint color; Second, see if it contains toxic substances; Third, look at the solid wood material; Four to see if the size of the rules. Only by mastering this “four look” will it not be in the maze of the door without distinguishing authenticity from falsehood.

2, sound

When selecting a solid wood door, be sure to check the thickness of the door, or tap the door with your hand. If the sound is dull, it means that the door is of good quality. In general, the higher the proportion of solid wood in a wooden door, the heavier this door is. If it is a pure solid wood door, the pattern of the surface will be irregular; if you look at the past, the pattern on the surface of the door is smooth, and it is often not a real solid wood door.

3, paint

As a post-process, its good or bad will affect the final use effect. At the same time, paint costs are an important part of the cost of wooden doors. The types of paint are roughly divided into phenolic paint, polyurethane paint, polyester paint, and PU paint. Among them, the paint film of phenolic paint and alkyd paint was poor in texture and adhesion and was basically eliminated. At present, the most used are lacquer, polyester paint and PU paint. Nitrocellulose lacquer is used in large quantities because of its simple construction. However, the paint film is thin, and the hand feels poor, resulting in poor results.

Interior door installation points

Pre-installation preparation:

1. The stacking of the door leaf and the door frame should use a backing plate, and separate the frame from the door leaf, prohibit storing with acid and alkali goods, and keep the interior as clean and dry as possible.

2, placed in a room without heat, in order to avoid heat deformation.

3. Pay attention to the construction site and clean the work area to check if the dimensions between the door opening and the door frame are correct.

Door cover installation:

1. The connecting part of the door cover assembly should be kept flat and free of black seams; the hardware should be locked; the diagonal of the door cover should be correct, the tolerance within 2 meters should be ≤ 1mm, and 2 meters above should be ≤ 1.5mm.

2. The gap between the door frame and the wall is filled with styrofoam.

3. After the door frame is in contact with the ground, use a mold-proof building filler to fill it around the door frame.

Installation effect:

1. The gap between the door cover, the door line and the floor is <3mm, and then use a waterproof sealant to fill the gap.

2. After the entire door has been installed, check whether it is open and flexible. There is no scratch on the whole.

3, when installed, cut off the lines must be cleaned up and taken away.

Editor's summary: The above is about the introduction of the interior door size , and hopefully it will help friends who have this need! For more information, please continue to pay attention to our website, follow-up will show more exciting content.

Interior door size

Spline

This screen retainer spline is constructed of top quality vinyl that is round in shape. It features a hollow core center, it is serrated on its exterior surface, and there is black/white/grey in color. Vinyl screen retainer spline like this one is used to hold fiberglass and aluminum screen material to screen frames of both windows and doors. Pairing the correct spline size and color will ensure your screens go in smoothly and look great. 

As the professional Insect Screen supplier, we have all kinds components for Screen Window and door, would like to cooperated with consumer from all the world to settle the insect problem.

Insect Screen Components

Insect Screen Components,Slide-Up Insect Screen,Stainless Steelwire Screen,Window Screen

Huanghua Techo Building Material Co., Ltd. , http://www.insectsscreen.com