Analysis: Seven Ways of Video Conference Transmission
2019-02-07 12:06:14
Currently, there are mainly two kinds of network environments that are ubiquitous. One is a circuit-switched network, such as ISDN, DDN, and PSTN. The other type is packet-switched networks such as ATM, IP, and Frame Relay.
Using ISDN lines
For most individual users and small business users, the use of ISDN line access is a more economical and practical choice. ISDN uses the public telephone network to provide users with end-to-end digital channel connections for carrying various telephony services including voice and non-voice. ISDN lines are used to transmit conference television on ISDN channels at rates from 384kb/s to 2Mb/s. Since the ISDN charges the communication according to the used B channel (64 kb/s), the domestic communication rate of the 1B channel is equal to the ordinary telephone communication rate (according to the most widely used circuit switching method).
For users with less traffic and shorter communication time, the cost of using ISDN is far lower than the cost of renting a DDN leased line or frame relay circuit, and it has the characteristics of high speed, low investment, and easy networking, and can meet the basic conference TV. System application requirements. However, the nationwide ISDN network is still in the stage of continuous upgrading, and reliability and stability are insufficient compared to the dedicated line.
Rent DDN Line
Large enterprises and institutions often have high requirements for video effects. At this time, they can choose the access mode of the DDN private line. The use of DDN dedicated lines has high transmission quality, small network delay, high circuit reliability, high network security, and convenient networking. Although DDN has the above advantages, because the digital circuit provided by DDN is a semi-permanent connection, that is, regardless of whether the user transmits data, the connection is maintained, so the cost is relatively high, not suitable for users with shorter communication time, but only suitable for long Time-to-point and multipoint-to-point communication links, because the DDN line charges by the number of point-to-point. If some group users' subordinate departments are connected to the company's headquarters, they can use a multi-site DDN private network, but if subordinate departments also need to communicate frequently, if you use point-to-point connections, the subordinate departments of the company will form a network. Network, so that the user's cost is too high.
System using PSTN
For ordinary individual users, if you want to try a video conference, you can try PSTN access. The PSTN public telephone network is currently the most widely used network system. Its advantages are wide coverage, ease of use, low price, and easy networking. However, the network speed can only reach 56 kbps, the line quality is poor, and the transmission rate is low. Therefore, the voice and image transmission for video conference is far from enough. The software-based videoconferencing system can achieve a 4f/s image transmission rate. The biggest drawback is that the image quality is too bad, which will greatly affect the quality of the conference. Generally, it is rarely used.
Use ATM network
If you want to get good video effects, and access to the ATM network is very convenient, ATM network access is also an option. ATM is an asynchronous transmission mode, which combines the advantages of circuit switching and packet switching. It can transmit wide-band signals of any speed and can transmit voice, data, image and video signals. The most important feature of this technology is QoS guarantee. This solution is recommended for units with line conditions and high quality requirements. Its features are good image quality and convenient networking (it is not necessary to connect all TV conference terminal lines. MCU) High reliability. However, the equipment costs are high and an ATM network is required for access.
IP network based system
The most simple and easy way to access is the IP network. IP-based networks employ packet-switching techniques because packet switching does not guarantee orderliness and fixed delays, and therefore does not guarantee a fixed delay and bandwidth. In order to better solve the service quality of real-time communication, protocols such as UDP/IP, RTP, RTCP, and RSVP are adopted. The video conference system applied to broadband IP networks such as ADSL and FTTB+LAN has achieved very good results. In today's ubiquitous IP networks, this type of network is convenient and inexpensive. However, since the packet-switched IP network follows the principle of best effort delivery, the video conferencing effect of this access method is worse than that of ISDN, DDN, and other dedicated lines. But its good cost performance has been favored by more and more users, especially for small and medium-sized enterprises and individuals with sufficient network bandwidth.
Using satellite access
The satellite network has the incomparable performance advantages of terrestrial networks in the mid- and long-distance video conferences. It can cover remote areas such as seas and mountains, has high transmission rates and good security, and is flexible and convenient for the venue construction and relocation. It is a multinational corporation. It is a good choice, satellite broadband video conferencing system supports multi-channel conference video, documents and data integrated transmission broadcast. The disadvantage of this scheme is that it is expensive. In addition to the channel fee for renting satellites, the construction cost of each satellite ground station is about 200,000 yuan. At the same time, satellite communication has a large delay and is not suitable for video conferencing systems with high real-time requirements.
Frame relay mode
Frame relay access mode is also a professional conference access mode. Frame relay technology is mainly used to transfer data services. Frame relay frames are suitable for encapsulating data units of local area networks and transmitting burst services. It is a method of wide area network communications. This kind of network has high efficiency, large network throughput and low communication delay. The frame relay user's access rate is from 64 kbit/s to 2 Mbit/s, and can even reach 34 Mbit/s. Frame Relay-based networks are expensive, but video effects are good.
Using ISDN lines
For most individual users and small business users, the use of ISDN line access is a more economical and practical choice. ISDN uses the public telephone network to provide users with end-to-end digital channel connections for carrying various telephony services including voice and non-voice. ISDN lines are used to transmit conference television on ISDN channels at rates from 384kb/s to 2Mb/s. Since the ISDN charges the communication according to the used B channel (64 kb/s), the domestic communication rate of the 1B channel is equal to the ordinary telephone communication rate (according to the most widely used circuit switching method).
For users with less traffic and shorter communication time, the cost of using ISDN is far lower than the cost of renting a DDN leased line or frame relay circuit, and it has the characteristics of high speed, low investment, and easy networking, and can meet the basic conference TV. System application requirements. However, the nationwide ISDN network is still in the stage of continuous upgrading, and reliability and stability are insufficient compared to the dedicated line.
Rent DDN Line
Large enterprises and institutions often have high requirements for video effects. At this time, they can choose the access mode of the DDN private line. The use of DDN dedicated lines has high transmission quality, small network delay, high circuit reliability, high network security, and convenient networking. Although DDN has the above advantages, because the digital circuit provided by DDN is a semi-permanent connection, that is, regardless of whether the user transmits data, the connection is maintained, so the cost is relatively high, not suitable for users with shorter communication time, but only suitable for long Time-to-point and multipoint-to-point communication links, because the DDN line charges by the number of point-to-point. If some group users' subordinate departments are connected to the company's headquarters, they can use a multi-site DDN private network, but if subordinate departments also need to communicate frequently, if you use point-to-point connections, the subordinate departments of the company will form a network. Network, so that the user's cost is too high.
System using PSTN
For ordinary individual users, if you want to try a video conference, you can try PSTN access. The PSTN public telephone network is currently the most widely used network system. Its advantages are wide coverage, ease of use, low price, and easy networking. However, the network speed can only reach 56 kbps, the line quality is poor, and the transmission rate is low. Therefore, the voice and image transmission for video conference is far from enough. The software-based videoconferencing system can achieve a 4f/s image transmission rate. The biggest drawback is that the image quality is too bad, which will greatly affect the quality of the conference. Generally, it is rarely used.
Use ATM network
If you want to get good video effects, and access to the ATM network is very convenient, ATM network access is also an option. ATM is an asynchronous transmission mode, which combines the advantages of circuit switching and packet switching. It can transmit wide-band signals of any speed and can transmit voice, data, image and video signals. The most important feature of this technology is QoS guarantee. This solution is recommended for units with line conditions and high quality requirements. Its features are good image quality and convenient networking (it is not necessary to connect all TV conference terminal lines. MCU) High reliability. However, the equipment costs are high and an ATM network is required for access.
IP network based system
The most simple and easy way to access is the IP network. IP-based networks employ packet-switching techniques because packet switching does not guarantee orderliness and fixed delays, and therefore does not guarantee a fixed delay and bandwidth. In order to better solve the service quality of real-time communication, protocols such as UDP/IP, RTP, RTCP, and RSVP are adopted. The video conference system applied to broadband IP networks such as ADSL and FTTB+LAN has achieved very good results. In today's ubiquitous IP networks, this type of network is convenient and inexpensive. However, since the packet-switched IP network follows the principle of best effort delivery, the video conferencing effect of this access method is worse than that of ISDN, DDN, and other dedicated lines. But its good cost performance has been favored by more and more users, especially for small and medium-sized enterprises and individuals with sufficient network bandwidth.
Using satellite access
The satellite network has the incomparable performance advantages of terrestrial networks in the mid- and long-distance video conferences. It can cover remote areas such as seas and mountains, has high transmission rates and good security, and is flexible and convenient for the venue construction and relocation. It is a multinational corporation. It is a good choice, satellite broadband video conferencing system supports multi-channel conference video, documents and data integrated transmission broadcast. The disadvantage of this scheme is that it is expensive. In addition to the channel fee for renting satellites, the construction cost of each satellite ground station is about 200,000 yuan. At the same time, satellite communication has a large delay and is not suitable for video conferencing systems with high real-time requirements.
Frame relay mode
Frame relay access mode is also a professional conference access mode. Frame relay technology is mainly used to transfer data services. Frame relay frames are suitable for encapsulating data units of local area networks and transmitting burst services. It is a method of wide area network communications. This kind of network has high efficiency, large network throughput and low communication delay. The frame relay user's access rate is from 64 kbit/s to 2 Mbit/s, and can even reach 34 Mbit/s. Frame Relay-based networks are expensive, but video effects are good.
Non-magnetic Drill collars
Non-magnetic Drill Collar materials with
low- strength (YDWC20-14) by combining a proprietary chemical analysis and a
rotary hammer forging process with low magnetic permeability excellent machine
ability.
Each Drill Collar is fully inspected by internal inspection dept. All data
obtained are recorded on the inspection certificate furnished with each drill
collar. API monogram, serial number, OD, ID, type and size of connections are
stamped on recessed mill flats.
Drill collars are available in lengths from 10 to 31 feet and outside diameter
from 31/8" to 11"
The non-magnetic drill collar is made of a low-carbon high-chromium-manganese alloy steel. It is refined after a strict chemical composition and refined by forging to achieve its mechanical properties. It has good low magnetic permeability and high strength. Mechanical properties, excellent intergranular corrosion resistance and excellent wear resistance. When the magnetic field strength is 1×105/4π A/m, the relative magnetic permeability μr of the non-magnetic drill collar is ≤1.010.
The non-magnetic drill collar has a magnetic induction intensity gradient of ≤0.05μT along the inner hole at any distance of 100mm.
Non-magnetic Drill Collar
Non Magnetic Drill Collar,Api Standard Non-Magnetic Drill Collar,Non-Magnetic Oil Drilling Collar,Stainless Steel Non-Magnetic Drill Collar
Hejian Deris Petroleum Drilling Equipment Co.,Ltd. , http://www.welldrillingbit.com