Comparison of advantages and disadvantages of solid wood furniture wood

Recently, solid wood furniture has become more and more popular with consumers, and has become a sweet bun in the furniture industry. Consumers are very concerned about the market situation of solid wood furniture.

1. Oak Furniture

Oak furniture is relatively common on the market, and is divided into red oak and white oak. The superior oak is mostly produced from abroad. Common oak furniture is American. Its advantages: the wood of oak furniture is harder, the stability is stronger, the texture is clearer, the color is light, and the wear is durable. The furniture made is durable. Disadvantages: The moisture in oak furniture is not easy to dry completely, and it is easy to rot after a long time.

2. Birch furniture

Birch furniture is also relatively common on the market. Its advantages are: furniture made of birch is easy to process, resistant, smooth cut surface, good paint and glue performance. The bark of birch is also more flexible and beautiful. Most manufacturers like to use birch as the core material of other furniture or as inlay material. Disadvantages: The fiber has poor shear resistance, and it is easy to "stubble break". The roots and nodules of birch have many patterns, and the hygroscopicity is also relatively large.

3. Elm furniture

Everyone knows that North Yunan Beech is a good piece of wood for furniture. The elm wood is hard and is known as "elm pimple". The advantages of elm furniture: tough wood, strong corrosion resistance; moderate hardness and strength, suitable for carving; clear texture, beautiful pattern. Disadvantages: Elm is not easy to dry. If the wood is not dried properly, the elm furniture produced is prone to cracking and deformation. Elm is divided into new and old. New elm is easy to deform, loves long insects, and shrinks seriously; old elm has old insect eyes, old cracks, old tenon eyes, etc.

4. Camphor wood furniture

Zhangmu believes that everyone is no stranger. Zhangmu rarely makes a whole piece of furniture, and is usually used as the backboard of a wardrobe. Advantages: Wood is a porous material with strong and long-lasting aroma. It can prevent insects, absorb moisture, eliminate odor, and purify the air, so it is very suitable to be the backboard of the wardrobe. The disadvantage is that camphor wood contains camphor, which has the effect of promoting blood circulation and removing blood stasis. If infants and young children are stimulated by the smell of camphor wood for a long time, they will also experience adverse reactions.

5. Ash furniture

Recently, ash furniture has been favored by lovers of solid wood furniture at moderate prices. Its advantages: the material of ash will be slightly hard and beautiful, the pattern is beautiful, the structure is coarse, it is easy to process, the toughness is large, and the coating and adhesion are good. Disadvantages: average drying and general stability, although not easy to deform, but it is easy to shrink. It is also susceptible to carnivorous meal beetles and common furniture beetles.

Each type of wood has its advantages and disadvantages. It is the best way to choose solid wood furniture according to the actual situation of the environment. For example, Shanghai is humid and has a large temperature difference. This area is suitable for wood with strong stability to make furniture ; while the northern area is more suitable for furniture made of tough wood such as elm.

Special Epoxy Stop Slurry Floor (no vibration stops)

Scope of adaptation:
Particularly suitable for water, oil and other ground, and all the non-slip requirements of the ground, such as access, corridors, staircases, underground parking ramps and so on.
Performance characteristics:
1, made of epoxy resin plus high quality Curing Agent;
2, rough surface effect, patterns can be large or small;
3, acid, alkali, salt and oil corrosion;
4, wear, pressure, impact resistance.
Service life:
Thickness of 1 ~ 5mm above, the service life of more than 5 years.
Construction Technology:
1, surface treatment;
2, brushing primer;
3, Scratch-resistant non-slip mortar, sand sprinkle;
4, brush wear-resisting finish varnish.
Technical index:

Special Epoxy Stop Slurry Floor

Special Epoxy Stop Slurry Floor,Special Epoxy Slipping Mortar Floor,Epoxy Mortar Antiskid Floor,Parking Epoxy Stop Slurry Floor

Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com