Features of JZK Series Vacuum Oil Purifier for Insulating Oil Regeneration
Features of JZK Series Vacuum Oil Purifier for Insulating Oil Regeneration
The vacuum oil filter absorbs the advanced technology of similar products at home and abroad for innovative design, and has excellent cost performance. In the oil treatment process and equipment performance in the leading level, with a high degree of vacuum, oil filter speed, protection of oil and other advantages, can increase the oil breakdown voltage 35KV. This series of products can be used fixed or trailer movable type, suitable for the installation and repair of large-scale transformer oil handling, vacuum oil transformer and hot oil circulation drying.
JZK series vacuum oil purifier for insulating oil regeneration Features:
1. The machine has a tank body and a two-stage vacuum separation chamber. The inter-stage liquid level is automatically balanced and forms an inter-stage pressure difference. The performance is better than a single-stage vacuum oil filter.
2. The fore pump of the standard configuration of the machine adopts the world-leading European imported vacuum pump (natural cooling method), which has fast pumping speed and can quickly obtain high working vacuum degree.
3. Vacuum separation is a new technology, using a unique stainless steel folding cyclone degassing dehydration separation column, increasing the separation area to make the oil thin film and achieve three-dimensional evaporation to obtain enough vaporization time to ensure the best effect of a separation.
4, the use of new heating devices, low heating load, avoid oil aging.
5, personalized design, users can choose according to the needs of imported or partially imported products,
6, impurity filter are equipped with the United States imported filter material, large filtration area, strong pollution capacity, high filtration accuracy.
7, the machine running low noise, no leakage, long service life.
Heavy steel grating refers to the special requirements for the carrying capacity of steel gratings. It is generally used in ports, offshore platforms, military factories and other areas, and the carrying capacity is generally more than 40 tons. The width of the flat steel of the heavy steel grid plate is generally 60-180mm, the thickness of the flat steel is generally 6-10mm, the diameter of the twist steel is generally 8mm or 10mm, and the spacing of the flat steel is generally 30-40mm.
Heavy load grid board classification:
There are two types of heavy load grid plates: pressure welding and pressure locking:
Heavy-loaded pressure-welded steel gratings are made by pressure-welding technology to form a permanent connection between the high-strength heavy-duty square steel and large-size load-bearing flat steel through high temperature and high pressure, so as to form a better lateral (Steel Grating width direction) carrying capacity. It is generally recommended that both sides of the steel grating be edged with edged plates.
The heavy-loaded grid plates can provide better lateral load-carrying capacity, and can effectively prevent the tilt instability of the load-bearing flat steel, and are used more as heavy-duty steel gratings.
Due to the special nature of heavy-duty grid panels, we generally advise our customers to inform them of the load requirements and support conditions. We select the most economically reasonable specifications for our customers.
Heavy Duty Steel Grating,Heavy Duty Load Steel Grating,Heavy Load Steel Bar Grating,Heavy Duty load Steel Grid
Hebei Zhenxing Jinyuan Wire Mesh Group Co.,Ltd , http://www.zxsteelgrating.com