How to accept hardcover room?
>>> Hardcover House acceptance 14 military regulations
Acceptance of quality standards based on hardcover housing
Currently, there are two construction standards used in the decoration industry. One is the "Interior acceptance standard for home decoration projects" and the Other is the "Advanced decoration engineering acceptance standard." Which of the two standards are used during acceptance depends on the purchase contract. Which one is indicated and the acceptance of the project is based on this standard.
First, check whether the decoration equipment and contract agreement is consistent
Some time ago, some fine-tuned building projects were found to be inconsistent with the original contracted brands when the owners discovered that anti-theft doors, sanitary ware, decorative materials, lamps, and whole cabinets were inspected. The existence of the above problems has a certain degree of universality. Therefore, it is recommended that the owners do not have to rush to check the construction quality of the construction project at the time of acceptance. Instead, they should spend some time checking the equipment. The reason is simple. The replacement of the brand of the equipment means a change in the quality of the home (which, of course, does not necessarily mean that the quality of the home has fallen. Look at the difference between the brand after the replacement and the original contract).
Second, what inspections should pay attention to the renovation project
Due to climate reasons, some decoration projects may have more or less problems due to climatic reasons during acceptance. Therefore, the author suggests that the inspection should first be focused on the hidden projects:
The first step is to check the water pipes in the kitchen and toilet to see if the drainage pipe is drained smoothly and if the water pipe is leaking. At this time, you can put the sink, basin, and bathtub in full water and then drain it. Check the speed of drainage. When you check the toilet, you must repeat the drainage test several times to see the drainage effect.
The second step is to check the distribution line. Turn on all light switches and see if the lights are on. If the conditions permit, you should also use a multimeter to check whether the socket has electricity; use a telephone to check the telephone line for a signal; use an antenna inspection tool to check the TV antenna signal.
The third step is to check the emptying situation of the kitchen and bathroom and other parts of the wall tiles. Use a small rubber mallet to randomly tap the tiles and floor tiles. If the emptying rate exceeds 3%, there is a quality problem. (The emptying rate is the number of empty drums in 100 tiles and floor tiles, and it's empty. What is the drum rate?)
The fourth step is to inspect the woodworking products and paintwork products. This step is more complicated. Simply put, it should be checked whether the wood products are deformed, whether the cracking at the joints is serious, whether the installation of the hardware is firm and whether the paint is flowing, and whether there is a large-scale cracking phenomenon in the wall paint. These can basically be Rely on our eyes to observe.
The fifth step is to do a careful inspection of some corners. Such as whether there is a water barrier at the bathroom door; whether the window will have rain inflow; whether the switch socket panel scratches; bathroom hardware installation location is reasonable and so on.
Third, what issues should not be used as a condition to refuse acceptance
As we all know, the winter is dry, the summer is humid, and the air humidity is very different. Therefore, many fine decoration projects will show cracks in some wood products during winter inspection. In addition, at present, the general practice of external insulation of interior walls is that insulation boards are placed on the indoor side. Therefore, cracks in the walls are also a problem that the construction unit is still unable to solve. Therefore, the reasons for the above problems are caused by the climate in the area where Beijing is located, and need to be completed step by step through the construction unit's warranty after the owner has checked in. In other words, it can be repaired at any time until it does not crack.
House inspection entrance decoration children's room decoration decoration house interior decoration paint switch home cabinet cupboard door kitchen cabinet door bathroom tile overall bathroom bathroom door bathroom floor tile exterior tile kitchen tile
Other
plastic spools model Co., Ltd. , http://www.wire-spool.com