How to deal with common shower failures
What are the common faults in showers? What are the methods for handling shower failures?
Shower FAQ
Q: When using a rain shower, I found that the water is not a jet of fine water. In some places, it is a thick water column. What should I do?
A: There are two reasons why the shower water becomes thick and fine mixed water. First, the shower spray method of your home is adjustable. You can adjust the nozzle rotation. If it is not the cause of the adjustment, the dirt in the nozzle is too If it is caused by a small round cap in the middle of the nozzle, use a small flat-blade screwdriver to open it, use a Phillips screwdriver to screw down the screw, open the shower, rinse with a water brush, brush the shower hole with a toothbrush, and then install the restore.
Supplement: There are several kinds of water discharge modes for the shower belt adjustment function. Adjusting the adjustment plate will have more internal results for function conversion, such as shower, large and small pulse, and mixing function.
Q: When the shower is used for a long time, it will often block, some holes will come out of the water, and some will not come out. What should I do?
A: There are two types of shower spouts on the market. One is hard material. Only clean the needle to remove dirt when cleaning. There is also a soft material, usually silica gel, which can be removed by hand. The latter is recommended. However, due to the different quality and grade of silica gel, you should ask carefully when purchasing.
Supplement: The mask on the shower generally contains a self-cleaning mask. The function of the self-cleaning sheet is to adjust the amount of water, and to clean it. The self-cleaning sheet is usually made of rubber or silica gel.
Handling shower failure
1: The basin faucet and kitchen faucet have a small amount of water, no foaming
Possible cause: The water pressure is too low, causing the bubbler to not generate bubbles
Solution: Remove the faucet and replace it with a new bubbler
2: Water leaks at the hose and faucet connection
Possible causes: improper installation, deformation of the rubber ring, uneven or too thin outlet pipe joint, or the hose does not match the faucet.
Solution: Select the appropriate hose and faucet according to the specifications, replace the rubber ring, and reinstall.
3: low water temperature
Possible reasons: the water heater is not enough, the temperature is not adjusted.
Solution: Adjust the temperature control button or buy a larger water heater.
Concerned about surprises
Tag: Shower Basin faucet Common faults Frequently asked questions Water output
Previous: Prevent accidents of spraying machine users need to pay attention to what Next: How to judge the pinhole of nickel plating
Long Life Prefabricated Steel Structure Warehouse
Advantages
1. Free design
2. Fast construction,time saving and labor saving
3. Easy installation, we can also send our engineers to help for the installation supervision
4. Environment friendly: most of the excess materials can be recycled
5.Long using time up to 50 years
6. Lower cost and easy mainteance
7.Stable and earthquake resistance
Prefabricated Steel Structure
Prefabricated Steel Structure,Heavy Industrial Steel Structure,Steel Structure,Prefabricated Steel Buildings
Zhongda Steel Structure , http://www.zhongdametal.com