How to register imported bearings
| Home>Bearing knowledge>How to register imported bearings |
How to register imported bearings
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
Scientific storage of imported bearings; only the relative humidity of the storage room does not exceed 60%; the temperature changes little; the bearings can be stored in the original packaging for a long time. Bearings with sealing rings or dust covers are stored for a long time. The characteristics of the grease in the bearing may be affected. The bearings removed in the original packaging shall be properly protected from corrosion and contamination.
The correct registration method for large rolling bearings; the bearing is placed in a horizontal orientation; the entire side of the bearing ring should be supported. If the bearing is placed in a straight orientation; because the thickness of the bearing ring is relatively high. Noisy 亓 亓 赡芑岬 赡芑岬 赡芑岬 岢 岢 岢 岢 赡芑岬 赡芑岬 赡芑岬 赡芑岬
Bearing registration has a very large impact on future use; therefore; we must pay attention to the bearing registration.
Recommend to friends comments close window
| Bearing related knowledge |
| Rolling bearing selection method Timing view of bearings (6) Analysis of the Causes Affecting the Failure of Imported Bearings KOYO bearing-heavy bearing common bearing abnormalities and their causes |
This article links to http://
Please indicate the bearing network http://
Previous: FAG imported bearings oscillation and temperature discrimination bearing damage Next: Disadvantages in casting processing
First, the product description:
Water-based Curing Agent is a polymer water-based emulsion, spray the surface of the newly poured cement concrete to form a protective film, plug the concrete pores, delay water evaporation, the concrete surface to form a continuous transparent film, sufficient Hydration to achieve conservation results.
Second, the performance characteristics:
1, construction is convenient
2, is an aqueous product, will not cause damage to the human body, the environment and pollution.
3, good conservation effect, does not contain any damage to the quality of cement concrete ingredients.
4, the nature of the emulsion used in this product is stable, non-toxic.
Third, the scope of application:
New cast concrete surface such as: roads, airports, large cement concrete projects, concrete components, wear-resistant floor and so on.
Fourth, the construction process:
1, the material should be fully mixed before use.
2, the final surface of the concrete surface after calendering can spray evenly on its surface Curing Agent.
3, construction time is about 1-2 hours after calendering (depending on the ambient temperature and humidity at the time) The basic requirement is that the surface has no free water. If there is no spraying equipment, can also be used soft brush or roller construction, construction should be cautious operation, so as not to damage the concrete surface.
Water-Based Curing Agent,Water-Based Reactive Curing Agent,Water-Based Curing Agent Ks-3C02,Water-Based Curing Agent Ks-3C01
Jiangmen Kasole Building Materials Co., LTD. , https://www.kasole-paint.com