What details should you pay attention to when customizing furniture?

2020-12-21 15:23:58
Jc001.load('iframe') JIFrame.create({ 'url' : '/go.php?action=ads&iframeHeight=250&isIframe=1&key=%BC%D2%BE%DF&pos_id=jc001_news_detail_30&reqkey=1&style=margin%3A15px+15px+ 25px+0%3B+height%3A255px%3Bwidth%3A255px%3B+float%3Aleft%3B', 'height' : 250 })

More and more people customize furniture, because custom furniture is not only popular but also can make full use of the home space, on the other hand can meet the young people's pursuit of individual life, but if you neglect the use of the living space and family habits, I never thought of going to maintain the furniture, which caused the life of our furniture to be short and caused a lot of trouble. The following small series will give you a brief introduction on how to maintain the furniture:

1. From the usual daily life, always use a soft rag to scrub the furniture surface. Or use a feather duster to gently sweep the surface of the furniture. Usually, chemical substances such as acid and alkali are not allowed to contact the surface of the furniture, so the damage to the furniture is great.

2, in normal life should prevent sharp objects from scratching the furniture. Usually, the furniture is also ventilated to avoid the moisture in the cabinet and clothes. Use less aromatic fragrances to deodorize the wardrobe, as they are likely to cause damage to the fabric. It is the taste of formaldehyde, and it is good for the body. If the surface is slightly scratched and bruised, it can be rubbed with a mixture of cloth soot and lemon juice or fried oil. After drying, it can be waxed; if the scratch is deeper and the damage is more serious, it needs to be blended with the same color paint;

3, do not put the furniture in the place where the sun can be directly exposed, in order to prevent the wood from cracking and deforming; Third, avoid placing the furniture in a very humid place, so as to prevent the wood from exploding, and the drawer will not open.

4, regularly check the hinges, slides, the degree of firmness found loose release immediately. It was found that the looseness was immediately fixed. . The movable hardware accessories such as the drawer of the furniture and the guide rail of the door should be regularly added with some lubricating oil. Make sure the furniture is agile.

5. Regularly check the connecting parts and find that the looseness is tightened in time. If the disassembly or assembly is caused by disassembly and assembly, the relevant brand store assistance office should be notified in time.

6. Finally, if the furniture damage cannot be handled by yourself, contact the after-sales or warranty.

Brushed Aluminum Composite Panel consists of two sheets of corrosion resistant aluminum permanently bonded to polyethylene core material. The surface of the front aluminum is brushed finish, including two kinds of brushed finish, long brushed Aluminum Composite Panel and short brushed aluminum composite panel. At the same time, other performance indicators must also meet the technical specifications of aluminum composite panels.
The brushed aluminum composite panel is a manufacturing process in which the aluminum sheet is repeatedly scraped out by sandpaper, and the process flow is mainly divided into three parts: deesterification, sand mill and water washing.

Brushed Aluminum Composite Panel

Alucobond Panel,Aluminium Panel Sheet,Aluminum Cladding Panels,Aluminum Plastic Composite Panel

Shenyang Xiandai Jixiang Decorative Material Co., Ltd , https://www.modernbond-acp.com