Industrial floor paint selection method
First, mechanical performance requirements
The main three aspects are as follows:
1. Abrasion resistance: Which vehicles will be used when the floor is in use?
2. Pressure resistance: How much load does the floor bear when it is used?
3. Impact resistance: Does the impact force cause the floor surface to peel off?
Second, chemical performance requirements
The main considerations are as follows:
1. Acid and alkali resistance: The type and concentration of corrosive chemicals used.
2. Solvent resistance: solvent type and contact time when used.
Third, the floor position status
According to the location of the floor on the underground floor or the ground floor, do you need to prevent moisture or choose a special moisture-proof floor?
Fourth, the base surface condition
1. Base strength: general requirements compressive strength ≥ 20Mpa
2. Flatness: Do you need to repair with epoxy mortar?
Five, aesthetic requirements
1. Color requirements: Do you need a color division area?
2. Brightness requirements: Is it matt or bright?
3. Flatness requirements: Is there a requirement for the flatness of the floor?
Sixth, security requirements
If the floor is in a greasy environment or on a ramp, you will need to choose a non-slip floor.
Valves Series,Check Valve ,Globe Valve ,Butterfly Valve
Plastic Tube, Pipe & Hose Co., Ltd. , http://www.hydraulic-couplings.com