Maintenance work for different stages of surface grinder

Division of labor before and after maintenance of surface grinder

The surface grinder mainly grinds and grinds the workpiece with a grinding wheel to achieve the required flatness. According to the shape of the table, it can be divided into two types: rectangular table and circular table. The main parameters of the rectangular table surface grinder are the width and length of the table. The main parameter of the round table surface grinder is the work surface diameter. According to the different types of shafts, it can be divided into horizontal shaft and vertical shaft grinding machine. The maintenance work of the surface grinder is divided into different stages, that is, the pre- and post-stage, different work needs to be done at different stages, and only the reasonable division of labor can achieve the efficient maintenance effect of the surface grinder.

Early stage

1. Clean the cooling pump iron filing trough, accessories and water tank and check the coolant, clean and adjust the grinding head and grinding head strip;

2, cleaning oil filter, disk, bed and rail surface, hydraulic pump, pipeline and oil circuit;

3. Check and adjust the pressure of the pressure valve to check whether the hydraulic handles and guide rails are flexible;

4. Check the stroke speed and the oil inlet condition of the guide rail;

5. Fasten the screws of each part;

6. Clean the inside and outside of the surface grinder and fill the lubricating oil of each part.

Late

1. Adjustment of the bearing clearance of the grinding wheel spindle;

2. Grinding the table top and shaving the burrs of each rail surface;

3. Check the oil pump and each pipeline joint, check and adjust the clearance of the screw nut of the feed mechanism;

4. Clean the surface grinder motor and electrical equipment.

Concerned about surprises

Label: Maintenance work for different stages of a surface grinder

Previous: The basic structure and classification of the inverter Next: Analysis of the characteristics of hydroforming technology

Washroom Thumb Turns And Indicating Bolts

Here at Leader Hardware we supply full toilet cubicle hardware packs that include all the necessary parts to do this. Both individual fittings and our full cubicle hardware packs are available in a variety of styles and finishes.

We have fittings for all types of cubicles, including ambulant disabled cubicles, glass cubicles, and those with flush fitting doors. You can find locks, hinges, headrails, angle brackets, and fixing clamps along with all the other fittings you may need in our product range.

Lavatory Indicating Door Bolt,Washroom Bolts,Washroom Thumb Turns Bolts,Washroom Indicating Bolts

Leader Hardware Manufacturer Limited , https://www.leaderhardwarecn.com