Three-person table size introduction
The size of the three-person dining table is generally 60*60 square table, or directly round table, the radius of the round table is 30, some customary rules are people sitting on the table and chairs of standard height, when the two feet are flat on the ground, the thighs It is basically perpendicular to the calf; when the arms are naturally drooping, the upper arm and the lower arm are also substantially vertical, and the height of the table top is just in contact with the plane of the arm.
Three-person dining table: dining table height: 750-790mm; dining chair height; 450-500mm; round table diameter: 500mm; square dining table size: 700 × 850 (mm); table turntable diameter; 700-800mm, table spacing: (where the seat Should be 500mm) should be greater than 500mm.
The above is the three-person table size problem introduced by Xiaobian for everyone. I hope that the above introduction can give you some small reference. If you still want to know more, you can continue to pay attention to our good home network, go Jiaju.com will continue to report for you.
1. Material: Hot Dipped Galvanized sheet Hot Dipped galvanized wire / ElectroGalvanized sheet Hot Dipped Galvanized Wire
2. Core Wire Diameter: 2.7±0.1mm / 2.5±0.1mm
Razor Barbed sheet thickness: 0.45±0.05mm
3. Razor Loop Diameter: 600mm
Other Coil diameter for u choose: 300mm, 400mm, 450mm, 500mm, 600mm, 700mm, 800mm, 900mm, 1000mm.
450mm(3 clips), 500mm(3 clips), 600mm(3 clips)900mm(5 clips) are the usually sizes
4. Razor Barbed Wire per coil weight: Be produced as customers requirements. (common weight is 7KG 10KG, 12kg, 14kg)
Razor Wire,Razor Barbed Wire,Concertina Razor Wire,Galvanized Razor Wire
Anping Bochuan Wire Mesh Co., Ltd. , https://www.wiremeshbocn.com