What are the methods for decorating the Yin Yang angle? Introduction to the decoration of Yin Yang angle
In the process of home decoration, most of the owners who mentioned the decoration of Yinyangjiao will be unfamiliar. This is an insignificant small project in the whole decoration process. It is a small project in fact, it is very troublesome to operate. The bad treatment of the yin and yang corners will also affect the beauty of the entire home environment. What are the treatments for the renovation of Yinyangyang? Which methods can make the processing of the Yin and Yang corner lines more beautiful! Come and study with Xiaobian!
First, the decoration of the yin and yang angle treatment
1. First batch ash treatment
First, a layer of ash is applied to the base layer, and then the line is stretched, so that the line can be seen clearly. Use a gray knife to clean the yin and yang corners and the surrounding bumps. If it is not cleaned, the bullet will hit the obstacle and it will not be straight.
2. Yin and Yang angle bullet line
At each vertical yin and yang angle, the vertical line is used to perform the elastic treatment, and a parallel line parallel to the vertical line of the yin and yang is placed on the two sides 500mm with the vertical line of the yin and yang as the reference. The line is defined as “yin and yang angleâ€. Standard line". Before the wall puts the putty, use the plaster to level the inside and outside of the yin and yang angles within 500mm. Leveling to the vertical direction of the 2m ruler is not more than 2mm. Use a plaster or putty to find a smooth yin and yang angle to 500mm on both sides.
3. Brush putty
Use putty to straighten the corner along the ink line. After drying, open the ash. Use a 2 meter L-shaped aluminum alloy to pull one head by one foot. Push it from the side of the female corner to the negative angle. When pushing to the corner, gently back and forth. After twitching, it will be scraped in parallel, so that the treated negative angle will not have a small bend. After drying, check whether the yin and yang angles are qualified. Check the flatness of the wall at the yin and yang angle according to the vertical line. The error should be leveled within 5mm with the wall lining. If the error exceeds 5mm, the gypsum should be used for leveling.
4. Yang angle anti-collision treatment
Because the male angle is convex, it is easy to be hit, causing damage to the wall or even damage to people or furniture. In order to avoid this, you can take anti-collision treatment on the positive angle. The alternative is to round the corners and sand them into small arcs; or you can attach them to protect them.
Second, the more beautiful decoration approach angle line of Yin and Yang
In the process of home construction, the decorative materials that meet the yin and yang corners of the wall generally have tiles, paints, and wallpapers. The following is a brief introduction to the treatment methods of these three types of wall yin and yang angles.
1, the wall yin and yang angle stickers
When the construction workers tiling, in fact, the yin and yang angle treatment of the wall is the most difficult, how to deal with it? The most common method is to use the tile itself to splicing, and the edge part of the tile is cut into a 45 degree angle with a cutting machine. , or the construction personnel to carry out manual operation, it is best to leave more when the edge of the brick is inverted, so that the corners that come out will be more rounded. When making the tiles, you must find the level and the two corners are aligned in the middle.
2, wall yin and yang angle brush paint
In the wall yin and yang angle brush paint must be straight, some construction personnel to ensure straight, so when doing the Yin angle, will play the line in the corner of the corner, when the line, we can visually find the wall The two most protruding parts, then a black line pops up in the two most convex places, and then use a 1.5-2 meter angle aluminum model to straighten a black line just after the line is opened; As with the yin angle, first keep it straight, then scrape it. When scraping, it is usually operated with an aluminum alloy that is 2 meters long.
3, wall yin and yang corner stickers wallpaper
When affixing the corner of the wall, the constructor can first put the wallpaper on the wall with a scraper. Be sure to cross the corner of the wall, then use your hand to fold the wallpaper from top to bottom at the corner of the wall, and finally along the vertical line. The wallpaper is cut with a utility knife and glued with glue; when the wall is covered with a negative angle, you can first operate from the center of the last wallpaper, then flatten the corner of the wall, and then scrape it with the scraper. Let the wallpaper stick to the wall.
Everyone in life often hears a sentence: the details determine success or failure. Decoration is also a reason, often a small and inconspicuous place, it may be the "culprit" of the entire project, so everyone must pay attention to the decoration of the Yin Yang corner content mentioned in the above, want to know more More decorative yin and yang corner decoration information, please continue to pay attention to the decoration home network!
More related wonderful reading:
How to build a home improvement yin and yang angle? What are the methods for treating yin and yang?
Chuzhou Jincheng Metalwork Co.,Ltd , https://www.jinchengscaffold.com