Air (heat pump) water heater installation needs to pay attention to which

As close as possible to the wall, easy to install; close to the water source and water location to reduce the length of the pipeline, split installation is good for winter to cool the cold out of the room (if needed), reduce heat loss; close to the outdoor wall location, easy to drill small holes In order to facilitate the cold air to be discharged outside in the winter. In addition, it is preferable to have a floor drain to facilitate the discharge of condensed water.

How much hot water can be produced by air (heat pump) water heaters

From the product performance and theory, the air (heat pump) water heater can reciprocate and continuously produce hot water. At normal temperature, hot water can be produced every hour as follows (45 ° C - 55 ° C): depending on the size of the unit.

Air (heat pump) water heater optimum temperature and water consumption

In general, how many degrees is it most appropriate for a person to bathe water each time? How much water does a person need?

The bath water temperature is most suitable for 42 ° C, the middle and old people can be slightly higher 1-2 ° C, and the shower water is about 40 to 50 liters per person. The bathtub and jacuzzi are determined by capacity.

Nylon Products

Polycarbonate Sheet ,Phenolic Sheet ,Nylon Products ,Polyurethane Sheet

Plastic Sheet, Board & Panel Co., Ltd. , http://www.nbuhmwpe.com