Aluminum alloy extruder, the size of the grinding tool is the standard for judging the tonnage of the extruder?
2020-11-26 03:16:15
Aluminum alloy extruder is a kind of mechanical equipment that can extrude aluminum alloy doors and windows and aluminum profiles. It is also widely known as aluminum extrusion machine. We present the most accurate and easy to understand knowledge in a simple question and answer mode. . Let us learn from them, grow together, and make progress together. You pay attention to us, we will reward you, and we will continue to collect more knowledge on aluminum extrusion presses in the future. When the aluminum alloy extruder is used, in order to avoid sticking aluminum chips on the end face of the barrel and the extrusion gasket, what measures can be taken? A: When the aluminum extrusion machine is used, in order to avoid the end face and extrusion of the barrel The aluminum scraps are stuck on the gasket. The measures we can take are to apply a proper amount of mold release grease to these parts, but it should be noted that it should not be excessive to prevent the grease from entering the machine or the mold and causing pollution. The specific tonnage of the aluminum alloy extruder can be judged and answered. Regarding the tonnage of the aluminum extrusion machine, it is necessary to clearly know that the first is to look at the marking on the extruded beam. If not, it is to look at the equipment. The initial interface on the console will also be labeled accordingly. If there is none, then it can only be judged by relying on experience and practice accumulation. What is the daily requirement of the aluminum alloy extruder, and the larger the grinding tool, the larger the tonnage required for the aluminum alloy extruder. Answer: The daily requirements of the aluminum extrusion machine are mainly two, one is to do daily The second step is to keep the machinery clean and clean. As for the larger the grinding tools, the larger the tonnage required for the aluminum extrusion press? The answer is yes. That is, the larger the abrasive tool, the larger the tonnage required for the aluminum extruder. Http://news.chinawj.com.cn 
R507 is an HFC blend designed to be a replacement for R502 in low and medium temperature refrigeration applications. It is similar in characteristics to R404A however, being an azeotropic blend, R507A does not suffer from glide or fractionation making it suitable for additional applications such as centrifugal compressors.
R507 Refrigerant Gas,R507 Replacement Gas,Blend Refrigerant Gas,R507 Retrofit Gas
ZHEJIANG ZHONGLAN REFRIGERATION TECHNOLOGY CO.,LTD , https://www.uiszl.com