Fire | 4 Days 3 Listed Companies One After Another Fire Caused 7 Dead Factory Fire Fighting?

According to Xinhua News Agency reported, according to Changle County, Weifang City, Shandong county propaganda department news, at 9:20 on the 19th, is located in Changle County, Shandong Weifang City Economic Development Zone in Shandong Rike Chemical Co., a workshop deflagration with fire . The accident caused a total of 7 deaths and 4 injuries. As of press time, the fire has been extinguished. Cause of the accident is being investigated.

Japan Chemical (300214.SZ) temporarily suspended trading . At present, all the workshops in the company's Changle plant area have been temporarily suspended. The plant's production capacity accounts for approximately 50% of the company's total production capacity . The property damage caused by the fire accident is still in the process of confirmation and verification. The property damaged by the fire has been insured by the insurance company for property insurance. Shares resume trading on December 20.

Coincidentally.

December 19, Zhejiang Huayou Cobalt Co. Ltd. (603799.SH) announced that a wholly owned subsidiary of Zhejiang Branch of the nickel-cobalt Limited (hereinafter referred to as "Branch of the nickel") a cut-off waste plant fire ACCIDENT. After the accident, Branch of the nickel contact immediately organized rescue, and on December 18 evening around 23:00 put the fire out. The specific causes and losses of the accident are under investigation and verification. According to preliminary estimates, the loss is not significant. The relevant company department has started the fixed assets insurance claims procedure.

Zhejiang Huayou Cobalt Industry Co., Ltd. said in an announcement that the accident did not cause any casualties nor caused environmental pollution accidents and secondary disasters.

Also yesterday, December 19 after-hours, and the Sea Energy (837168.oc) announced that the company's plant accident happened battery fire area semi-staging area in December 2017 in the morning on the 16th about 3:32 cause of the fire Is under investigation. The fire damaged the plant, no casualties.

It is worth noting that this is the second fire accident that Xinghai Energy has made in the past 15 months. September 28, 2016, and the Sea energy announcement, the company plant area a aging room happened battery fire incidents around at 16:10 on September 26, due to the discovery early, proper disposal, it has quickly put the fire out, did not cause Casualties.

The high number of factory fires caused a huge amount of property damage to the company and even cost our employees and young firefighters the cost of their lives. However, why some companies do a very good job of safe production, but few security accidents! Yi Jing Technology believes that the occurrence of fire accidents in each company may seem accidental, but it is inevitable. Awareness of fire safety is not a government document and it can be enhanced and strengthened with one inspection. What is more important is that the company itself must be able to truly understand fire protection and attach importance to fire safety.

First of all, there can be no fire safety opportunism. Many corporate managers and responsible persons are ignorant of their sense of responsibility and law. They think that their companies will not have fire accidents, and that accidents happen to other families. As everyone knows, with this kind of opportunistic thinking, it is inevitable that fire accidents occur.

Second, fire safety must be a long warning bell. It is believed that in every enterprise that has a fire, all kinds of fire regulations, rules and regulations are all documents, documents, and documents. But do we always call the bells and cry for a long time and do a good job of conducting fire inspections; whether each fire drill is used as a fire accident to wake up oneself and warn Others; whether every fire safety training for the company is taken as a corporate development. Security protection?

It is hoped that the leaders of each company, the person in charge of fire protection, and the front-line staff will attach importance to fire safety and tighten a fire safety string at all times, and do not relax their vigilance because there is no fire accident at one time.

So, how can we do a good job in the fire safety of the factory?

I. About the company's production site safety protection management

1 , truly "safety first, prevention-oriented" . We must consistently and consistently implement the national safety regulations, fire safety regulations of provinces and cities, and corporate rules and regulations.

2. Set clear warning signs on vulnerable areas to place fire-fighting boxes, fire extinguishers, buckets, fire-fighting sand, hooks, and other fire-fighting equipment to ensure timely rescue in the event of a dangerous situation.

3 , do a good job of fire safety inspection monitoring and rescue plan.

Second, the implementation of the responsibility system for production safety

1. Link the production responsibility system with economic benefits, make clear rewards and penalties, regularly check the implementation of the safety production responsibility system, commend the implementation of good performance, and give irresponsible criticism and punishment.

2. Fully carry out full-scale group defense work and extensively enter fire safety training, publicity and drills so that everyone understands that everyone understands. In addition to being able to comply consciously, it is necessary to supervise the compliance of others.

3. Leaders at all levels should personally take the lead, take responsibility seriously, and arrange plans, check, summarize, and evaluate the implementation of fire safety.

III. Implementation of Safe Production Measures

1. Establish and improve the safety production responsibility system and safety guarantee system.

2. Conduct induction safety training for new employees, make full use of newspapers, signs, banners to promote education, and establish a "safety first" awareness.

3 , a variety of safety warning signs complete, eye-catching, always reminding the safety awareness of construction workers.

4. All kinds of machine tools used must be checked before use.

5. Actively carry out team safety activities, do team self-inspection, mutual inspection, timely detection of hidden accidents, timely rectification, leadership supervision process and results, and use early meetings, assessments, etc. to strengthen employees' knowledge of fire control knowledge and skills.

6 , in accordance with the provisions of timely release of labor protection products to workers.

7. Perfect the fire emergency plan of the factory according to the actual situation, conduct regular drills of emergency plans, and strengthen the communication with fire safety responsibilities and fire safety person in charge.

8. Perfect the fire safety inspection system at all times according to the actual situation, identify the potential safety hazards and problems, identify the responsible persons, and formulate rectification measures and plans.

The information in this article comes from the Internet and was reorganized and edited by China Rescue Equipment Network.