Bathroom decoration details more than nine notes can not be ignored
For bathroom and bathroom renovation, how to reflect its comfort and safety has become a focus of decoration. When interviewed by reporters in the home improvement industry, the reporter learned that there are many details involved in the decoration of the bathroom. If not handled properly, it will not only directly affect the quality of future home life, but will also affect the mood. Bathroom decoration should pay attention to the following points:
Carrie bathroom   Deller Head
1. Ceiling: Because of the heavy moisture in the bathroom, choose materials that have waterproof, anti-corrosion, and anti-rust properties.
2, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tile is laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope toward the floor drain; the ground must be done after laying tiles Closed water experiment, the time must be guaranteed at least 24 hours; laying tiles should pay attention to the seams and alignment of the wall tiles, to ensure the overall sense of the entire bathroom, so as not to produce a visually cluttered impression.
3. Wall: The tiles on the wall should also be waterproof and waterproof. Also, the tiles should be flat and must be aligned with the floor tiles to ensure the integrity of the wall and the floor. The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.
4, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.
5. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the position Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.
6, waterway renovation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as washing machine model, the location of the water will be different.
7, sanitary ware installation: the best in the decoration before the water hole distance, according to the size of the selected bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet seat installation should be used first The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.
8. Ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must be provided with a retrograde gate to prevent backflow of dirty air.
Bathroom Notes Zhongyu Bathroom Window Glass Switch Home Decoration Socket Glass Tile Glass Sliding Door Glass Door Bathroom Sliding Door Bathroom Tile Bathroom Door Bathroom Wall Tile Bathroom Size Bathroom Tiles Bathroom Wash Basin Total Bathroom Toilet Waterproof Toilet Door Size Tile Rubber
Product introduction
CH3093 Carbon Deoxidizer
CH3093 type Carbon Deoxidizer directly deoxidized by combustion method, the heating temperature under 260 ℃ ~ 320 ℃ condition, oxygen content can be 0.1% ~ 0.2% of nitrogen gas through CH3093 heating combustion type carbon deoxidizer, make nitrogen oxygen and deoxidizer carbon oxidation (burning) generated containing trace amounts of carbon dioxide (< 1 PPM/M3) of high purity nitrogen (99.9995%).
CH3093 type carbon deoxidizer is applicable to the inert gas such as nitrogen type burning without hydrogenation corrosion in deoxidizer, can make the oxygen content (0.1%), nitrogen carrier gas through the carbon deoxidizer, purification processing device of purification CH3093 type carbon deoxidizer furnished without hydrogen, it not only high deoxidization depth (residual O2 1 PPM or less), great capacity of DNA (1.2 ~ 1.6 M3), and easy operation, reliable in performance.
Its characteristics require regular addition of deoxidizer.
Physical parameters of CH3093 carbon deoxidizer:
Physical indicators of the project
Feed gas 99.8 ~ 99.9%
Appearance of size ¢3.05mm±0.2mm
The heating temperature ℃ 280℃ ~ 350℃
Bulk density 500~520kg/m³
Air speed ≥10000~15000n-1
The water content ≤0.05%
DNA capacity 1.2m³~1.6m³
Using the pressure 0.6mpa~0.8mpa
The residual rate of quantity ≤1ppm
The compressive strength ≥65NT
Raw material gas - heating combustion system - drying - filter - high purity nitrogen 99.9995%
CH3093 Carbon Deoxidizer
CH3093 Carbon Deoxidizer,Deoxidizing Agent,Carbon Deoxidizer,Carbon Iron Deoxidizer
Zhejiang Changxing Haihua Chemical Co.,Ltd. , http://www.zjcxhhcms.com