Cast iron pneumatic diaphragm pump features introduced

Pneumatic diaphragm diaphragm pump is a new born in recent years, a new type of transport machinery, diaphragm pneumatic diaphragm pump is a volume change caused by the reciprocating diaphragm displacement pump, its working principle is similar to the piston pump, It has many of the advantages of the pump, is now on the market a wider range of applications of a pump. Xiaobian here to introduce you about the characteristics of cast iron pneumatic diaphragm pump. The characteristics of cast iron pneumatic diaphragm pump Cast iron pneumatic diaphragm pump is a volume change caused by the diaphragm reciprocating displacement volumetric pump, the working principle is similar to the plunger pump (1) the pump will not overheat: compressed air as a driving force, the exhaust When the process is an expansion of endothermic, pneumatic pump temperature is reduced, no harmful gases discharged. (2) does not produce spark: pneumatic diaphragm pump without electricity as power, grounding and then prevent the static spark (3) can contain particles of liquid: because the volume of work and imports for the ball valve, so it is not easy to be blocked. (4) Extremely low shear force on the material: How to suck in the work and how to spit it out, so the material agitation is minimal, which is suitable for the transportation of unstable substances (5) The flow rate can be adjusted, and the section can be installed at the exit of the material Flow valve to regulate flow. (6) Self-priming function. (7) Can be air operated without danger. (8) can dive work. (9) The fluids that can be delivered are extremely wide, ranging from low viscosity to high viscosity, from corrosive to viscous. (10) There is no complicated control system, no cables, fuses and so on. (11) small size, light weight, easy to move. (12) Maintenance is easy without lubrication, and will not pollute the work environment due to drip. (13) The pump is always efficient and will not be reduced by wear. (14) 100% energy utilization, shut down the outlet, the pump automatically shut down, the device moves, wear, overload, fever (15) no dynamic seal, easy maintenance to avoid leakage. No dead spots at work. Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Gogoing (QQ / wechat: 181817456) starting: http://beng.liuti.cn/ (service hotline: 400-6030-811)