Charging like a refuelling battery for this electric vehicle
The development of the electric vehicle industry has now reached a certain scale, and there is still continuous capital to enter this field. However, the most common complaints about electric vehicles are still battery life and charging time. Even Tesla’s SuperCharger takes one hour to fill up the car. Electricity, so the owner must set aside sufficient time to charge, if you forget to charge and rush out, this may be a nightmare.
In order to solve this problem, Purdue University invented an electric vehicle battery that can be recharged similarly. At an economical price, the electric vehicle is fully charged in an instant. Users no longer have to wait. At the International Porous Body Society conference held in the Netherlands, Professor John Cushman of Purdue University published the new fluid battery IF-battery. It is reported that the battery is ready to enter the commercialization stage.
According to reports, the battery uses an unblended fluid for acidification and reduction, that is, as long as the vehicle's electrolyte is pumped out, and then the new electrolyte can be charged as soon as the fuel is added, and the recovered electrolyte can be used. Solar energy or wind power and other clean energy are charged and reused. The operation of this system is more cost-effective than the traditional charging system because the electrolyte can be distributed to existing gas stations to provide corresponding services.
Another Purdue University doctor, Mike Mueterthies, said that IF-battery does not use a power film, so even if it is stored at home without any risk, while the traditional battery does not have such an advantage, and the cost of IF-battery to Lower battery life than other fluid batteries. Currently IF-battery has conducted several safety tests. At this stage, the research team needs to find a suitable car manufacturer to cooperate with it in order to promote this technology to the world more quickly.
Economical Plasma Cutting Machine is designed on the basis of the traditional Table Plasma Cutting Machine.
1. Economic Plasma Cutting Machine has the advantages of table plasma Cutting Machine - stable, at the same time, economic Plasma Cutter is suitable for cutting thicker sheet metal.
2. The economical plasma cutting machine needs to weld the cutting table by yourself, the advantage is the plasma cutter won't be affected cutting effect by the deformation of the table, so that the accuracy of cnc cutting machine can be ensure.3. The economical plasma cutting machine is suitable for cutting various thickness metal sheets.
4. Economical and practical.
Economic Plasma Cutting Machine
Plasma Table,Cnc Plasma Cutter,Cnc Plasma,Economic Plasma Cutting Machine
Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnmetalcutting.com