Fluorine plastic magnetic drive pump precautions

1. Due to the pump bearing cooling and lubrication is transported by the intermediary of the shield, it is absolutely forbidden air-to-air, while avoiding the power outage after the restart caused by time-space operation. 2 is transported medium, if it contains solid particles, the pump inlet to be added to the filter: If containing ferromagnetic particles, the need to add magnetic filters. 3. Pump in use should be less than 40 ℃ ambient temperature, motor temperature must not exceed 75 ℃. 4. The media sent by Elm shall be within the allowable range of the pump. Fluorine plastic pump temperature can not be lower than minus 30 ℃ maximum can not exceed 100 ℃. Conveying the suction pressure is not more than 0.2MPa, the maximum working Zhuangli 1.6MPa, the density is not greater than 1600Kg / m3, the viscosity is not greater than 30X10-6m㎡ / s without hard particles and fibers of the liquid. 5. For the transport fluid is easy to precipitate knot easy medium, after use should be promptly cleaned, drain the pump effusion. 6. 1000 hours after the normal operation of the magnetic pump should be demolished inspection bearing and face ring wear and tear, and replace the consumable parts should not be reused.