Second-hand housing inspection seven Raiders
First, look at the contract nuclear area
See if the actual facilities are in line with the brand and quantity of the facilities and equipment specified on the sales contract, and whether there are any omissions. Confirm whether the drawing of the sales contract is consistent with the reality, whether the structure is the same as the original design drawing, whether the housing area has actually been measured by the real estate department, and whether there is any difference in the area signed with the contract.
[Prompt]: Check the sale of housing, generally if the error with the actual measurement area within 3%, will not be considered, if the error exceeds 3%, the compensation agreement signed by both parties shall prevail. It is recommended that the difference between the area of ​​the house and the actual measured area be 2%, preferably not more than 5%.
Second, with a tape measure height [self-owned tools] 5 meters tape. Measure the height of the building to see if it matches the contract.
[Hint]: It's best to write down your own small book. At the same time, some data and questions about the acceptance of the house should be written on the paper provided by the property company.
Third, check the water to see the leakage plugging [self-provided tools] plastic bags, sand, a plastic basin acceptance of the water situation: the first use basin water, and then to the various water irrigation, respectively, basin water, bathtub water, toilet water , kitchen and sanitary and balcony floor drains, etc., basically every sink should be poured into two pots of water around, should hear the sound of squeaking, and no water on the surface. You can also open the faucet, make the water flow as large as possible, anxiously, look at the water pressure, and then try the drainage speed.
In addition, it is necessary to check specifically whether the toilet floor leaks or whether water is present. It is advisable to use plastic bags filled with sand on floor drains, and then store some water in the bathroom, shallow on the line (about 2 cm high), 24 hours later, to the corresponding lower bathroom to see if there is leakage at the top. If it is carried out at the same time as the upper occupant, it may also detect whether there is leakage at the top of the own bathroom. Check whether there is water on the bathroom floor. Use a plastic washbasin to store some water in the toilet, and then release the water to see if there is water accumulation on the floor. There should be no stagnant water on the qualified ground and the water flow should be smooth.
[Hint]: After doing this, make sure that there is no problem. We must put these prominent waters (such as basin water, bathtub water, and toilet water) in a plastic bag to cover the nozzle, and then affix it together. The water needs to be drained. Sesso, to prevent the pineapple from entering during the decoration, blocking the pipeline.
4. Tap the head to hear the cracks. [Bring your own tool]: 1 small hammer gently knocks on the wall surface and floor decorative surface with a hammer to check whether the wall and the floor of the house are empty. If you hear the voice of “emptyâ€, it means that each surface layer is in contact with the wall (ground) surface and needs to be reworked; if you hear a dull knock, it means that they are in good contact.
[Tips]: If there is any empty drums, property personnel must be repaired as soon as possible, otherwise it will be easy to break through the floor during the renovation and hinder the relationship between the neighbors.
Fifth, the wall is not dripping without cracks <br> Carefully check the flatness of the wall to see if there is water seepage in the wall, cracks, especially to see if there are some walls of water traces, such as the top surface, exterior walls and other places.
[Tips 1]: The balcony cracks are dangerous. Most of the cracks in the general wall are not structural cracks, and they are not dangerous. Problems with the structure of the house often appear on the balcony. If there is a crack in the connection between the room and the balcony, it may be a sign of the breakage of the balcony.
ã€Tips 2】: If you buy the top floor, be sure to check the top surface of each house for signs of rain leakage.
ã€Tips 3】: Pay special attention if there is condensation on the walls in the winter room. There must be a problem with the insulation on the wall.
Six, doors and windows flexible listening sound insulation
Try to see if doors and windows can be opened flexibly, visually check if the doors and the door frame, the sides of the window and the window frame are parallel, close the doors and windows to hear the sound insulation effect, and also understand the degree of their sealing.
Seven, pull off the switch to see the shunt
After the breaker is pulled off, see if the interior of the house is completely powered off, and check whether each branch gate completely controls each branch line. It is best to use a multimeter to measure the flow of each strong and weak electricity.
[prompt]: Also do not forget to open the telephone, TV line interface, pull a pull, look at the firmness of the socket to see if it is fake.
Home inspection balcony doors and windows windows housing room house decoration toilet bathroom design bathroom door bathroom design
Shoe Rack,Shoe Cabinet Co., Ltd. , http://www.nsstoragebox.com