Special pneumatic one-way diaphragm pump, because it is dual-core

If the small series to ask you: Do you know the pump? I believe the answer is: know! But if you ask Xiaobian members of the pump family? What are the characteristics and uses? The answer should only Can "Oh" it. Now Xiaobian will take you to know a special pump member: dual-core single pneumatic diaphragm pump. Why it special? Because it is dual-core! Pneumatic diaphragm pump 1, the performance characteristics of the pump can be used for water-soluble ink and gravure printing ink machine to enhance the system can also be used to transport a variety of viscosity or Water, oil, emulsions, slurries with solid particles and various corrosive fluids. With self-priming pumps, submersible pumps, shielding pumps, mud pumps and debris pump many advantages, while overcoming the gear pump, motor pump, centrifugal pump deficiencies, excellent overall performance. 2, advantages (1) to compressed air as the driving force, no sparks, no electromagnetic interference, sensitive pneumatic, especially adapted to flammable and explosive environment. Flow and discharge pressure with the valve open continuous adjustable. (2) Without water diversion, excellent self-absorption and low flow resistance, it can transport slurry with high viscosity or solid particles. (3) simple structure, wearing parts, low speed reciprocating motion, wear parts, no lubrication, easy to use and maintain. (4) work stable, safe and hygienic, and with self-protection overload (5) on the working medium containing corrosive users, can provide special anti-corrosion diaphragm, to meet the special requirements. Dual-core aerodynamic one-way diaphragm pump, pneumatic one-way diaphragm pump Dual-core DC dual-core one-way pneumatic diaphragm pump, dual-core one-way pneumatic diaphragm pump, printing ink pump, printing press ink pump, printing press diaphragm pump, pneumatic one-way diaphragm Pump, one-way pneumatic diaphragm pump, pneumatic diaphragm pump, diaphragm pump (6) QM-2 type has the provincial ink and quick cleaning function, each color change or deactivation, the pump body and ink tube ink quickly Back to the ink barrel, each can save 1 kg of ink. 3. PRECAUTIONS (1) The pump should be mounted vertically upward as indicated by the arrow on the pump body. When installing, just lower the circular hole in the lower part of the pump directly to the φ12 vertical cylinder (set by the user) and press it with the screw. Dual-core one-way pneumatic diaphragm pump (2) Submersible use, the exhaust gas should be exported to the liquid level. (3) According to the medium viscosity and the required flow and discharge pressure, adjust the valve opening, the pressure is too high, the pump stops working. (4) If the start-up difficulties, available fingers, tap the exhaust several times, until the pump can work smoothly. (5) QM-2 type work is completed, according to the upper and lower ink switch, to be exhausted ink, pull out the discharge switch, and then pumping water (or thinner) to clean a few minutes, is conducive to the next start. (6) Replace the diaphragm or open the pump body should pay attention to spring pop-up wounding! After the installation should be no-load run for one minute, no abnormalities can be put into use. Read Xiaobian introduction of dual-core pneumatic diaphragm pump, and now we should know why Xiaobian said it is special? In fact, as long as you are using a variety of different pumps, pay attention to summing up, I believe you will find more special ! the individual pneumatic diaphragm pump Guangzhou IFAT China water show article belongs to the building industry interconnect (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps network editor: Ko Muk may ( QQ / WeChat: 2355779345) starting: http://beng.liuti.cn/ (service hotline: 400-6030-811)