Water Saving Toilet Selection Guide

There is a wide range of toilets on the market, which one is your "favorite". Listening to Andy Lau's "Toilet" song, some readers are confused: How can we properly purchase water-saving toilets?

In the building materials market, most of the stores sell second-floor drainage toilets, that is, there are two buttons to choose between 6-liter and 3-liter drainage. Several building materials stores said that they are selling water-saving toilets, and the maximum amount of flushing is 6 liters.

What type of toilet is water-saving? According to the mandatory provisions issued by the Ministry of Construction, the flushing water consumption of the stool during each washing cycle is no more than 6 liters. When the water pressure is 0.3Mpa, the stool flushing product has a flush volume of 6 litres to 8 liters, and the urinal flushing product once flushes 2 liters to 4 liters (if the man is two-stage flush, it is the first segment and the second segment. Sum). Rinsing time is 3 seconds to 10 seconds. At present, the water-saving toilet market is not standardized, and some manufacturers' products do not meet the water standard, but they use 6 liters of water, and even say that their products are 3 liters of water and 4 liters of water. Only one or two products of individual companies are water-saving, and it is hard to say that their products are all water-saving, hoping to seize the water-saving sanitary ware market.

With the increasingly severe situation of water shortage in our country, the National Standardization Committee has decided to include the "6 liters of toilet water system" as a national mandatory standard. This will legally make the water-saving sanitary ware occupy an irreplaceable position in the market, and the traditional water-consuming sanitary wares will exit the market.

Most toilets used by most residents in China are between 9 and 12 liters, which can be described as unlimited market opportunities. Therefore, 6 liters also became a selling point for the store.

Because of the high technical content of the water-saving toilet, it must achieve the purpose of reducing water consumption and flushing the dirt. Therefore, for the store's second-tier 3L and 6L toilets, consumers should also carefully check their product certifications.

On how to choose a water-saving toilet, it is recommended to do the flushing test on the spot when purchasing, determine the amount of flushing, and observe the effect of flushing. However, the second-floor toilet currently on the market is basically a fuzzy second-stage, and its flushing volume is not stable, and may be less than the flushing effect.

According to the AQSIQ's random inspection of the toilet market in Beijing, Shanghai, Hebei, Chongqing, and Guangdong in March, 37 of the 72 products are qualified, and the qualified rate is barely half, and another 10 products have serious quality. problem. Therefore, experts suggest that consumers to buy toilets in the building materials market not only depends on whether they are water-saving, but also depends on the quality of their qualified, of course, it is safer to buy those well-known brands of products. In addition, if it is convenient, it is best to consult some toilet materials.

Why does the current water-saving toilet market make consumers feel at a loss? The authority of certification bodies is not enough, lack of market access mechanisms, and insufficient market supervision. He said that with the gradual increase of public awareness of water-saving, the government should increase publicity in this area, through the implementation of enterprise product certification, the introduction of a number of well-known brands of products. At the same time, it increased the supervision of the market and cracked down on counterfeit and shoddy products.

Furniture brand water heater brand toilet building materials market

Jining ChangSong Construction Machinery Co.,Ltd is founded in 2000,located in jining city,Shandong province.Which is the hometown of Confucious and Mencious,the Pearl of Canal.
Based on the Supply Chain of Shantui.Komatsu Construction Machinery Manufacturer,we have advanced production equipment and Technical Staffs.Meanwhile,Welcome your OEM and ODM production requirement.
From the year of 2009.We successfully won the supplier qualification of China Petroleum Pipeline Bureau(CPP),Sinohydro Corporation Ltd,China Railway Group Ltd.(CTCE).Shantui Imp&Exp Co.,Ltd ,China Datang Corporation etc Super Large multinational enterprises.  
Business Scope as follows:

  1. Shantui,Shanghai,Pengpu,Hebei,XuanGong,Inner Mongolia Dadi,Zoomlion series Bulldozer ,Daifeng Pipelayer Maintenance Service and Excavator Spare Parts , bulldozers spare parts .
  2. Shantui,Degong,XCMG,LiuGong,XGMA,SDLG,Wheel loader,Grader, Road Roller ,Excavator Spare Parts and Spare parts.
  3. CCEC,DCEC,Weichai Steyr,Shangchai,Xichai,Engine Unit and Diesel Generator Set and Excavator Hydraulic Parts.
  4. Komatsu,Cat,Hitachi,Volvo,Case,Sany,XCMG,SDLG,Lishide,etc spare parts, Maintenance and Multi-functional parts.

Excavator Engine Parts ,Excavator Hydraulic Parts,Excavator Undercarriage Parts,Excavator Electric Parts,Excavator Structural Parts, Excavator Attachments .

We have rich experiences Maintenance Technical Engineer team,which means can provide Customs with highly efficiency Excavator Hydraulic Parts Maintenance Services.In the past few years ,we have running the Excavator Spare Parts Maintenance services very well all over the world,solved the problems in time,because of our outstanding technical services for Bulldozer,Pipelayer,Excavator,Excavator Spare Parts.
With the Independence Rights of  Imp&Exp,Our business have covered every part throughout the country.Under The Belt and Road Initiative,Excavator Hydraulic Parts International business also has developed to Russia, CIS countries,Middle east area,South America,Africa etc
Be Faithful to Our Original Aspiration  and Continue Marching Forward,to achieve the Cooperation win-win target. Hand in hand with friends from Local and abroad,make the harmony  and bright future is our Pursuit!
Jining ChangSong Construction Machinery Co.,Ltd,Which is the company Running Excavator Spare Parts business with Focus Spirits.Being the kind-hearted One and do the best is our Promise!

Excavator Hydraulic Parts

Excavator Hydraulic Parts,Excavator Spare Parts,Excavator Hydraulic Cylinder Assy,Excavator Swing Motor Assemblies

Jining Changsong Construction Machinery Co., Ltd. , http://www.jncsmachinery.com