Accepting the wooden floor: it’s important to watch the second
In June and July, it was again at the peak of the closing of the house. In the decoration that followed, many owners would choose wooden flooring. What issues should be paid attention to during the acceptance process?
Look at the color of the wooden floor is consistent. If the color difference is too large, it directly affects the appearance and can be exchanged. If the colors are too consistent and there is almost no chromatic aberration, it depends on whether the pattern on the floor surface is the same. If the patterns are similar, it may be a craft wooden floor, not a so-called precious wood. Nowadays, some wood flooring materials suppliers use ordinary wood-based wood flooring, but they are covered with a layer of precious wood veneer on the surface to shoddy it. The reverse side is covered with aluminum po, which is said to be used for moisture protection. The pattern of the opposite side is inconsistent with the front.
Second, listen to the sound of the wooden floor. During the acceptance, walk back and forth on the wooden floor, the footsteps must be aggravated, especially the wall parts and the door and hole parts should pay more attention to the acceptance, and the parts with sounds should be repeatedly moved to determine the specific position of the sound and mark well. In this case, you can ask to remove the resurfacing. The part with sound is caused by the construction workers during the construction process, the operation is not standardized, the ground keel is not fixed firmly, and the unqualified materials are mainly reflected in the fact that the ground keel is not dried.
Finally, check the surface of the wooden floor for blemishes, cracks, and scratches. It is common because the ground keel is untreated and there are mites inside. When the eye was found to be blinking, the wooden floor had been almost smashed; the gaps and scratches were known at a glance. The specification stipulates that the gap of the wooden floor should not exceed 0.5 mm; the scratch is mainly caused by the rough decoration. If it is still not repaired by the waxing method, it must be exchanged.
Aluminum Round Standoffs are straight round shape,which is most common and popular one.
Customized size,shape and color are available.As for the most popular types, M3x10mm,M3x15mm,M3x20mm,M3X25mm, M3X30mm, M3X35mm length round standoffs etc, are often in stock, which could be shipped timely.
Color for reference: black, red, blue, purple, pink, green, silver,orange, gold.
Aluminium Round Standoffs,Threaded Round Standoffs,Aluminum Sign Standoffs,Round Standoffs
Hobby Carbon CNC Technology(Shenzhen) Limited , https://www.hobbycarbon.com