**Driving the Trolley Line Installation Guide**
Installing a trolley line system requires careful planning and precise execution. Depending on the site conditions, different types of trolley lines can be used, such as the 200A-L paper trolley line. Once you've purchased the right trolley line, follow the manufacturer's instructions to ensure a safe and effective installation.
First, fix the angle brackets to the rail at intervals of 1.25 meters. These brackets can be welded or bolted in place, depending on the structure and requirements of the site. Next, install the lifting bracket and the fixed bracket directly below the angle bracket. This setup helps support the trolley wire and ensures smooth movement.
After that, secure the trolley wire between the lifting bracket and the fixed frame. Connect the power input, and make sure all sliding wire connection points are properly joined using aluminum connectors. Then, install the joint jacket and end cap to protect the connections and maintain electrical integrity.
The next step is to install the current collector. Solder the current collector bracket to the designated position on the vehicle. Place the current collector into the bracket and adjust its position so that it remains parallel to the trolley wire. This adjustment is crucial for reliable power transfer and preventing electrical issues.
Once everything is installed, perform a thorough test. Before starting the power test, use specialized tools to ensure the angle brackets are level and the trolley line remains straight without any bends. After confirming the alignment, conduct a power run to check the system’s performance. This process helps identify any potential problems early on and ensures the trolley line operates smoothly and safely.
By following these steps carefully, you can achieve a reliable and long-lasting trolley line system that meets your operational needs.
Double Sided Exit Sign
Double sided Emergency Exit Sign is a safety signage that is designed to be visible from both sides, making it ideal for use in hallways, stairwells, and other areas where visibility from multiple directions is important. These signs typically feature bright, easy-to-read lettering and symbols that indicate the location of emergency exits. They are often made of durable materials such as aluminum or plastic, and may be illuminated with LED lights for enhanced visibility in low-light conditions. Double sided emergency exit signs are essential for ensuring the safety of building occupants in the event of an emergency evacuation.
Double Sided Exit Sign,Double Face Exit Sign,Double Sided Fire Exit Signs,Double Sided Emergency Exit Sign
JIALINGHANG ELECTRONIC CO.,LTD. , https://www.jlhemergencylighting.com