**Driving the Trolley Line Installation Process**
Installing a trolley line system requires careful planning and attention to detail. Depending on the site conditions, different types of trolley lines are used, such as the 200A-L paper trolley line. Once you've purchased the right trolley line, follow the manufacturer's instructions carefully for proper installation.
First, install the angle brackets at regular intervals—typically every 1.25 meters. These brackets are either welded or fixed directly to the rail, ensuring a stable base for the entire system.
Next, mount the lifting bracket and the fixing bracket below the angle bracket. This step helps support the trolley wire and keeps it properly aligned.
Then, fix the trolley wire under the lifting bracket and the fixed frame. Make sure all connections are secure by installing the power input, aluminum connectors at each sliding wire connection point, and finally the joint jacket and end cap. These components protect the wiring and ensure safe operation.
After that, install the current collector. Solder the current collector bracket to the designated position on the vehicle. Place the current collector into the bracket and adjust its position so that it remains parallel with the trolley wire. Proper alignment is crucial for smooth and consistent power transfer.
Once everything is installed, perform the trolley line debugging. Before starting the power test, check that all angle brackets are level and that the sliding wires remain straight without any bends. Use specialized tools if needed to maintain alignment.
Finally, conduct a power test run to ensure the system operates smoothly and safely. This step confirms that all components are working correctly and that the trolley line is ready for regular use.
Proper installation and thorough testing not only improve the performance of the trolley line but also extend its lifespan and enhance safety during operation. Always follow the manufacturer’s guidelines and consult professionals if necessary.
CB Approved Emergency Exit Sign
Cb Approved Emergency Exit Sign,Self Luminous Exit Signs,Fire Exit Sign,Exit Sign With Lights
JIALINGHANG ELECTRONIC CO.,LTD. , https://www.jlhemergencylighting.com