GZ-2 new type of polymer anti-corrosion coating

[Product color] Black, gray, white, iron red, etc. 【Composition】 consists of modified acrylic and epoxy, chlorinated olefins, and polyurethane as base materials, adding non-toxic anti-corrosion pigments, additives and other components.

[Properties] The paint film is non-toxic, strong adhesion, fast drying, convenient construction, and has good acid, alkali, and salt corrosion resistance, and is excellent in water resistance, oil resistance, and weather resistance.

[Scope of Application] For the corrosion protection of drinking water pipelines and the anticorrosive coating of metal concrete pools and tanks. The internal and external walls of gas tanks and gas pipelines are painted and protected. The internal and external walls of oil storage tanks and oil pipelines are protected against corrosion. The anti-corrosion coating of power plants, chemicals, fertilizers, pharmaceuticals and other industrial plants and equipment. Environmental protection equipment, sewage treatment works and other steel structure, concrete structure underground or ground anti-corrosion coating.

[specific gravity] about 1.25

[Theoretic Dosage] about 180 g/m2 [Dry Film Thickness] about 50 μm [Proportioning] Two-component 5:1

[Application period] 2 hours to use [drying time] Drying time 25 °C: dry 2 hours, hard dry 24 hours, fully cured 7 days [construction points]

The corrosion of buried pipelines mainly comes from the outer wall, and the outer wall comes in contact with corrosive substances in the soil, causing corrosion of the steel. According to the different pipelines, comprehensive anti-corrosion experience at home and abroad, anti-corrosion coating program is not the same. For buried pipelines, a new GZ-2 high-molecular anti-corrosion paint brush is applied. The thickness of the wet film is about 80 μm. To increase the durability of the coating, glass cloth can be used for reinforcement. After coating a layer with glass fiber cloth, two new GZ-2 macromolecule anti-corrosion coatings are applied to ensure that the coating can fully cover the glass fiber cloth.

1. The rust on the metal surface of buried pipelines should be removed and wiped dry with solvent. After 24 hours, a thick coating (80 microns or more) of GZ-2 new polymer anticorrosive coating is used. Rain, fog, condensation and wind should not be applied.

2. Reinforce a layer of glass fiber cloth. Stretching tightly in one direction to facilitate the thorough interpenetration of glass fiber cloth and paint.

3, GZ-2 new type of polymer anti-corrosion coating brush two (thickness of 80 to 100 microns). This product can be applied by brush, roller or spray. (The reinforced glass fiber cloth can be decided according to the construction unit using several layers)

4, the product should be stored in a cool, ventilated place, to prevent rain and sun exposure, away from fire and heat sources, transport according to the provisions of flammable items.

5, paint consumption with two references: steel 180-200 g / square meter (brushing a).

[Package specification]: Group A 20kg / barrel B Group: 4KG / barrel [Storage and Transportation]: This product is stored in a ventilated, dry warehouse, to prevent direct sunlight, and isolate the fire source to prevent rain, collision, etc. .

【Storage period】: one year.