Incorrect flooring laying method affects life

Incorrect flooring laying method affects life Many owners do not have any major problems when it comes to floor decoration, but there are always problems in practical use. Many people will attribute these problems to the quality of the floor. In fact, relevant departments have already indicated through investigation that these problems have occurred. More than half of them are caused by improper flooring. Therefore, whether or not the floor laying process is reasonable is related to the service life of the floor.

1. The ground is uneven: The unevenness of the ground will cause some floors and keels to hang and it will sound when stepping on.

2. The keel is not dried: The moisture content of the undried wood keel is usually about 25%, and the qualified wood flooring moisture content is generally 12%. The humidity difference is too short to make the wood flooring absorb moisture quickly, causing the floor to arch and paint. Face burst. It is the usual practice of the current decoration team to lay the floor first and then perform other construction on the floor. However, after the floor is laid, it often takes a month or more before it is polished. During the period, there were no isolation measures for water vapor and chemicals on the floor and surrounding environment, which may cause the wooden floor to be deformed and cracked due to the rapid change in water content.

3, assembly too loose or too tight: wood flooring with the temperature and humidity changes in the environment, there will be expansion or contraction phenomenon. Therefore, when laying the floor, the tightness of the assembled wooden floor should be reasonably arranged according to the ambient temperature and humidity of the place of use. If it is too loose, there will be a large gap in the floor contraction. When it is too tight, the floor will arch when it expands.

4. Fixing method using wooden wedges and nails: The use of wooden wedges and iron nails in the construction will cause the nails to be insufficient due to the small contact surface between the wooden wedges and the nails. This can easily cause wooden keels. Loosen, and a noise will appear when treading on the floor.

Expanded Metal Mesh

Materials: Aluminum plate, thin low carbon steel plate, stainless steel plate, Al-Mg alloy plate, copper plate, nickel plate.

Category: Aluminum Expanded Metal Mesh, Small Expanded Steel Plate Mesh, Expanded Steel Mesh and Stainless Steel Expanded Steel Mesh . 

Surface treatment:  hot-dipped Galvanized, electro galvanized, PVC-coated.

Hole Patterns: Diamond, square, round, triangle, scale hole, etc.  

Characteristics: Expanded Mesh is strong and wear-resisting, lightness in weight and has good ventilation.

Usage: Expanded Steel Mesh is widely used in road, railway, civil building, water conservancy`s building; the protecting of all kinds of machines, electrical equipment (musical facilities), window and aquatic product's breed.  

Expanded Metal Mesh

Expanded Metal Mesh,Metal Mesh,Expanded Steel Mesh,Expanded Mesh

Hebei Jiebin Wire Mesh Products Co.,Ltd. ,