Easy-to-use instructions for quick-fitting scaffolds

When setting up advertisements and constructing stages, scaffolding is frequently used, especially when non-professionals are involved. In such cases, it's crucial to pay close attention to several key safety factors based on the actual working conditions: First, scaffolding should never be used without a proper inspection. If the planks laid on the scaffold are not securely fastened, they can easily shift or move, leading to serious accidents. Many workers have fallen from unstable scaffolds that weren't properly tied down, highlighting the critical need for strict scaffolding safety measures. Second, scaffolds built at higher elevations often have gaps or protruding boards (probe plates). If there’s no support in the middle of the plank and the ends become loose, the entire structure becomes unstable. Additionally, if the scaffolding isn’t firmly connected and the planks are too thin, the risk of collapse increases significantly. Third, using rusted or substandard materials is extremely dangerous. These materials may not be able to support the weight of both workers and equipment, leading to instability, shaking, or even tilting during construction. This directly compromises the safety of the workers on site. Fourth, when work is being carried out on multiple levels simultaneously, it's essential to install solid and secure protective barriers between the upper and lower areas. This prevents falling objects from causing injury to workers below. Lastly, when performing high-level operations, all tools should be placed in tool bags to avoid accidental drops. Furthermore, barriers or fences should be set up beneath the work area, and no one should be allowed to walk or stay in these zones to prevent potential injuries from falling objects. By following these safety protocols, the risks associated with scaffolding and high-place work can be significantly reduced, ensuring a safer environment for everyone involved.

Relevant Product

Pressure Tank is suitable for automatic Polishing Wax spray system, which is highly efficient, energy-saving and convenient!

saving 25% of the polishing liquid, and the high-pressure system can completely penetrate the abrasive on the grinding wheel, which can save 25% of the waste caused by the rotation of the grinding wheel

spray gun

The tool of automatic polishing wax spray, instead of manual waxing, can effectively improve the polishing efficiency, save labor and raw materials, and strengthen the polishing effect.

Automatic wax spraying system dedicated pressure bucket, automatic polishing high-pressure spray gun, polishing wheel dedicated center iron

Jiangmen Gude Polishing Equipment Co., Ltd , https://www.kokipolishing.com