Rivet nut application technical guide
The rivet nut is a nut applied to a thin plate or a sheet metal, and has a circular shape with embossed teeth and a guide groove at one end.
Application Guide for Rivet Nuts:
1. S series rivet nuts are made of easy-cutting iron. After heat treatment, the CLS series rivet nuts are easy to use and easy to cut stainless steel, and the surface is not treated.
2. The hardness of low carbon steel plate must be less than 70RB, and the hardness of stainless steel plate must be less than 80RB.
3. Applicable to plates of various thicknesses, the minimum thickness is 0.8mm. The tail number Z corresponding to the A dimension must be determined according to the thickness of the plate and the nut specification. The user orders according to the thickness of the plate according to the tail number in the table;
4, according to the aperture size to be accurately controlled, according to the tolerance size of 0-+0.075mm, preferably punching, the nut should generally be installed from the "disconnect" surface of the board.
The installation process is generally carried out by “pressing and riveting†operations and must not be knocked in.
Related recommendations: rivet nut supplier - rivet nut spot wholesale - rivet nut standard data query
PEM pressure riveting standard data query - rivet nut - rivet stud - rivet screw, etc.
Dust Filter Mask,Disposable Civilian Mask,Nonwoven 3Ply Mask,Nonwoven Civilian Mask
Chongqing Yilun Sanzi new packaging Co., Ltd , https://www.yilunmask.com