The shower installation steps teach you how many times to determine the installation height
Nowadays, many places have to pay for installation fees when purchasing showers. Although the price is not expensive, it is not cost-effective for consumers. In fact, it is not difficult to install the shower. As long as you master the installation height of the shower, DIY can be done by yourself. Throughout the installation process of the shower, the following small series will introduce you to the installation method of the shower and the height of the shower installation.
Shower installation method steps
1. First prepare a few tools needed to install the shower: drill, screwdriver, ruler, hammer (if there is a lack of tools such as drills and hammers, you can rent it at the bathroom hardware store);
2, look at the manual, then use the tape measure to measure the size, determine the location of the shower installation and the height of the shower installation, and mark it;
3. Place the shower support in the marked position, and then use a pencil to mark the specific location where the hole needs to be punched;
4. According to the position just made, punch holes in the wall;
5, hammer the expansion sleeve of the expansion screw into the hole, and then screw the circular bottom cover of the accessory to the wall;
6. The shower pole is mounted on the wall, first stabilize the upper fixed point, and then fix the lower position;
7. After determining that the inner corner screws of the above fixed points are all screwed in, perform fine adjustments;
8. Tighten the hose of the shower, install and install the hand shower, and the whole installation step is over.
So, how is the height of the shower installation determined?
For the height of the shower installation, there are clear regulations in the industry. According to the type of shower, there are two types, one is a concealed shower and the other is a wall mounted shower. According to the relevant regulations: the center of the concealed shower wall should be 2.1 meters from the ground, and the center of the shower switch should be 1.1 meters from the ground. The ceiling mounted shower is generally defined by the shower surface. The installation height is preferably 2 meters from the ground. However, this rule is dead, and people are alive. Therefore, in actual use, the height of the shower installation is entirely determined by the individual's wishes. As long as it is comfortable to use, it does not matter whether the height of the shower installation is high.
Aluminium Flat Strips,3003 Aluminium Strip,Aluminium Strip For Blinds,Aluminium Strip For Blinds
Zhengzhou Yearshine Industry Co., Ltd , https://www.zzyscorp.com