Bathroom plumbing products water saving standard basic stereotypes

In the recent announcement, the Technical Committee for Water Products and Appliances under the National Technical Committee for Industrial Water-saving Standardization has revealed plans to hold a five-year annual meeting of the Water Efficiency Subcommittee in Shunde, Foshan, on November 28. This event will also serve as a preparation session for the next term. During the meeting, discussions will focus on the draft version of the "Administrative Measures on Water Efficiency Standards." Additionally, the IPC-2012 standard, which is set to be implemented in 2014 for plumbing sanitary products, will be reviewed. The conference will also address and interpret lead-free standards and export certification requirements that are currently top of mind for industry stakeholders. Currently, domestic water-saving standards for sanitary products have been largely established. From the perspective of national regulations, water outlets sold in the market must comply with GB18145-2003 for ceramic taps and toilet water consumption, as outlined in GB6952-2005 "Sanitary Ceramics." For example, regular toilets should consume no more than 9L, while water-saving models should not exceed 6L, and the maximum water usage per flush must not go beyond 1.5L. On the industry level, the latest water efficiency standards for sanitary products include GB25501-2010, which sets water nozzle efficiency limits and ratings, and GB25502-2010, which defines toilet water efficiency limits and grades. These standards aim to ensure that products meet specific efficiency criteria, promoting sustainable water use. GB25501-2010 classifies water nozzle efficiency into three levels, with a minimum limit of 0.150 L/s and an evaluation value of 0.125 L/s. This means that any product exceeding 0.150 L/s is considered non-compliant, while those below 0.125 L/s are classified as water-saving. Similarly, GB25502-2010 divides toilet efficiency into five levels, with strict requirements on both single and dual-flush water consumption. Experts from the National Center for Testing and Qualification of Water Drainage and Water Saving Equipment note that the water-saving rating for faucets has been upgraded to Level 2, with flow rates reduced from 0.150 L/s to 0.125 L/s. This requires manufacturers to optimize internal structures and select appropriate components like aerators to meet these new benchmarks. Most major brands already possess the necessary production capabilities to comply with these standards. As the market becomes increasingly saturated with water-saving products, consumers are advised to look closely at product labels. According to GB25501-2010, manufacturers must clearly state the flow rate and efficiency rating on packaging, along with the relevant standard number. Before official labeling rules are enforced, companies may still design their own labels, but they should at least include key metrics such as flow rate and efficiency grade. With growing awareness around product safety, especially following incidents like the "lead-containing faucet" controversy earlier this year, consumers are now more cautious. The industry is also pushing for alignment with international standards, particularly those from Europe and the U.S., as production technologies continue to improve. Looking ahead, the upcoming implementation of the heavy metal content standards for water spouts and the IPC-2012 enforcement standard for plumbing sanitary products is expected to further align domestic practices with global benchmarks. This marks a significant step toward a more transparent and efficient water-saving industry.

Decorative Lines

Heilongjiang Junhe Building Materials Technology Co., Ltd , https://www.junhejiancai.com