Ceiling Construction Acceptance Raiders How to Choose the Right Ceiling
There are many places that need attention in the construction of ceilings. The materials used to install the ceiling must not only be of high quality, but also the master's construction process. However, many first-time homeowners are prone to fall into the erroneous zone of some ceiling construction acceptances, such as blindly installing suspended ceilings or excessively pursuing individual ceilings, ignoring cleanliness, without considering the height of the house layout. Therefore, it is necessary to understand the construction and acceptance of ceiling construction . Don't worry, if you have any needs in this area, you may wish to take a look at the ceiling construction acceptance strategy with me!
Construction Acceptance of Ceilings
First, cleverly prevent construction mistakes
Myth 1: Too much pursuit of personality
Some people install ceilings, they will design rugged sculpts, and think that the uneven shape will highlight the owner's personality, or use glass, mirrors and other materials, which brings difficulties to the usual cleaning, so that the ceiling becomes filth. So as to pollute the indoor air environment. This is particularly true in the northern regions where winds are relatively large and dusty.
Weapons: It is recommended that consumers install ceilings according to the actual conditions of the home space. The ceilings of the living room and bedroom are designed to be as simple as possible. The bathroom and kitchen are recommended to use common aluminum buckle ceilings, and glass and other materials are used as little as possible. This will prevent ceilings from becoming filth.
Misunderstanding 2: No need to set up maintenance port in ceiling
The ceiling can make the home space more beautiful, and many consumers ignore the future maintenance while pursuing the beauty. When the ceiling is installed, the maintenance opening is not left on the ceiling. In the future, the maintenance of ceilings and inspection of electric wires will become difficult.
Weapon: Setting the maintenance port may affect the appearance, but the maintenance port can not be lacking, because the ceiling may be full of wires, after the maintenance can not find the location can be probed into, all the places are sealed, you have to To lift the ceiling completely is really worth the candle. Small ceilings generally retain a 500mm x 600mm service port.
Misunderstanding 3: The ceiling installation does not require too much effort
Many consumers believe that the ceiling is only a small part of the decoration and the area is small. It does not require much thought. In the end, due to the insufficiency of the installation, the ceiling was not firm, and it was often the root cause of home safety.
Weapons: If the ceiling is not firmly installed, there is a danger of collapse. Therefore, when installing, be sure to install the ceiling keel, plate and other solid, do not plant a bane.
Myth 4: blind installation of ceiling
Many consumers think that home decoration should be enough grades to ceiling. In fact, because the current commercial floor is not as high as it used to be, it is usually only about 2.6 meters. If such a relatively small space is installed with suspended ceilings, it will make people feel nervous and depressed visually, and then cause some physical reactions, such as dizziness. Nausea and so on.
Weapons: not all spaces are suitable for the installation of ceilings, and the ceiling height also needs to be calculated. If the height of the house is only 2.6 to 2.8 meters, the best choice is to do a simple ceiling around the ceiling, the area should not be too large, the height of the general ceiling.
Second, be careful not to accept the error area
Misunderstanding 1: Acceptance does not check cleanliness
Some people may think that there will be no dust in the ceiling, no cleaning inspection, but if the ceiling is a laminated shape, it is easy to filth.
Weapons: The ceiling is easy to hide in dust. When the decoration is accepted, the cleanliness of the ceiling needs to be checked. It is generally necessary to check the cleanliness of the surface of the ceiling, whether there are debris in the void space of the ceiling, or whether there is waste left by construction.
Misunderstanding 2: The height of the ceiling of the aluminum buckle plate is high
When inspecting the ceiling installation of the aluminum buckle plate, some owners will grapple with the lack of smoothness on the surface of the ceiling plate and affect the overall aesthetics, and hope that the master can polish it again. In fact, this idea is a major misunderstanding of acceptance.
Weapons: The surface of the suspended ceiling is free from unevenness, is relatively smooth, and does not need to be too smooth. The surface that is too smooth will lead to an increase in the degree of spatial reflection and cause home light pollution.
Misunderstanding 3: The smoother the ceiling, the better
There is usually such an error in acceptance that the ceiling must be installed flat. Therefore, the owners have very strict inspection on the flatness during the inspection and acceptance, and believe that the requirement for the flatness of the ceiling is the same as that for the ground and the wall surface. In fact, this idea is not correct.
Weapons: The ceiling is stable, but it is not as smooth as possible. It is necessary to take into account the problem of sagging of the ceiling keel in the future. Therefore, when inspecting, the center of the ceiling keel generally should be arched 1/200 from the short side to meet the standard.
Third, how to choose the right ceiling
The top of the home space is as important as the wall and the ground, and the effect on the overall decoration effect is not small. At present, there are three types of ceiling decoration commonly used in ordinary homes: plasterboard ceilings, aluminum buckle ceilings, and integrated ceilings.
1. Gypsum board ceiling is the best choice
Spaces such as living rooms, bedrooms, etc., if ceilings are used, are generally in the form of gypsum board ceilings. Why? The main reason is that plasterboard ceilings can make complicated and beautiful shapes, which is particularly important for the living room as an important home "facade".
2. Aluminum buckle ceiling kitchen general choice
The kitchen and bathroom are traversed by various pipes, and the ceiling of the aluminum buckle plate can be used to subtly hide the pipes and make the space more beautiful and tidy. At the same time, due to the kitchen fumes and water vapor, ceilings with special materials are easier to handle than ordinary paints.
3 integrated ceiling kitchen new choice
In fact, the integrated ceiling is to make the ceiling module and electrical modules such as lighting, ventilation, and heating into modular modules of standard specifications. The installation is integrated according to the actual needs and location, and the integration of functions is achieved and the planning is rationalized. Space unified the overall style. With the increase of market awareness, integrated ceilings are increasingly favored by people.
Editor's summary: The quality of the ceiling is very intuitive to affect the appearance of the home, I believe that every owner wants to decorate the new home beautiful, then do not ignore the above mentioned in the article, in the ceiling construction and acceptance Be careful when you are in order to ensure that your home improvement is satisfactory.
Chinese corridor ceiling living room ceiling decoration renderings Mediterranean indoor ceiling two bedroom ceiling villa living room ceiling ceiling construction acceptance Raiders
film faced plywood is mainly made up of eucalyptus Plywood , poplar plywood or eucalyptus and poplar plywood, it is economic and practical for the construction concrete pouring, for it could be the face panel for any formwork system.LULI Group Co. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of Film Faced Plywood, venner, MDF , Particle board, Door skin , Blockboard , Finger joint board, OSB , paper, Steel etc.And we have High Quality film faced plywood.
film faced plywood Details:
size:1220*2440MM 1500*3000MM 915*1830MM 1250*2500MM
thickness:5MM--25MM
material:poplar, hardwood, combine, birch, finger jiont board
film color:browm, black, red
glue:WBP, MELAMINE, MR
Packaging Details:export standard packing,inside covered with plastic bag, outside covered with carton then steel strip for strength, the bottom with regenerative wood pallet
Delivery Time:Shipped in 20 days after payment
film faced plywood
Film Faced Plywood,Black Film Faced Plywood,18mm Film Faced Plywood,Film Faced Plywood Price
Luli Group Co.,Ltd. , https://www.cnluli.com