GO Jiaju tells you how much the height of the wallboard is suitable?
The wallboard can be used in many areas such as entrances, living rooms, dining rooms, aisles and stairwells. In recent years, with the promotion of consumption, many owners have selected wallboards as wall decoration materials, which are not only beautiful in appearance but also very suitable. So, how high is the height of the decorative wall panels at home? Here is Yingkang Family, a manufacturer of wallboards.
The whole home of the siding should be installed in the whole house. Normally installed on the monotonously decorated wall, it looks more layered.
The installation height of ordinary wallboard manufacturers is from full wall to top and half wall height. According to the height of the entire wall, the half height is about 0.9-1.2 meters, and the height of most of the wall panels is about 0.9 meters.
When the height of the wallboard is usually about 3 meters, if the half-wall wallboard is too low, it will not only not maintain the wall, but also affect the visual effect of the room.
The higher the floor of the house, the more suitable as a siding, which looks more atmospheric. Therefore, if the floor is too short, it is not recommended to use siding.
Before installing the siding, you must measure the scale first, then design the partition, and make some adjustments according to my hobbies to prevent problems such as uneven colors and irregular joints in the later construction.
The wall should be kept clean and flat. If there is unevenness visually, shovel the wall with tools, and the later installation will be better.
The moisture content of wood itself is large. If it is monotonous, it will lead to increased water content, and the phenomenon of loose joints or cracks will appear. Therefore, it is necessary to ensure the monotony of the wood and the wall, and do a good deal of moisture treatment.
Pay attention to leaving gaps when laying the siding, adhere to the average width difference, and the length and width errors of all should be small. When installing, the baseboard and the bead should be as close as possible to the panel, and the gap between them should not be too large. The distance between the fixed baseboard and the bead should not exceed 30cm. There is a corresponding specification for the height of the panel manufacturer.
Acid Dyes,Acid Red,Acid Black For Wool,Acid Black 172
ZHEJIANG E-DYE SUPPLY CHAIN MANAGEMENT CO.,LTD. , https://www.easytodyes.com