Hydroelectric reform common 5 big mistakes! You missed a big loss

For the decoration of white, the decoration is more or less somewhat regrettable, we can do is to minimize the regret in the decoration, as far as possible, since it is inevitable, then try to strictly control the important projects in order to avoid future rework Trouble, especially hidden projects, is not handled well, and concealment may turn into a hidden danger, threatening the safety factor of future home life. Today, Xiao Bian will take you to see what common mistakes are in hydropower reform so as to prevent it early!

First, the price of wire hose is not heavy

1, wrong consequences

After the hydropower reform is completed, if there is a problem with the water pipes, repairing the walls is very troublesome, and problems with the quality of pipes and wires can easily lead to safety accidents. In order to save budget, many people often pay less attention to quality when purchasing water pipes and wires, and only pay attention to prices. This is a major mistake. If the quality of wires and water pipes is not up to standard, there will be great safety risks after renovation.

2, the correct approach

Other decoration materials can be selected slightly lower, but when purchasing electric wires and pipes, we can not lower the standard, and we should try our best to purchase high quality products to ensure safety. Owners who do not know how to choose high quality pipes and wires can continue to read the next two articles.

Second, less power plug

1, wrong consequences

In the renovation of water and electricity, many people think that while installing one plug at the same time, some wires are saved, so the number of installed power plugs is reduced as much as possible. It should be noted that there will be more and more household appliances. Once there are new appliances but no outlets, it is difficult to install them. Secondly, when using electrical plugs for electrical equipment, it is necessary to avoid using several plugs at the same time. A plug is small, and several pieces of equipment are used together, which may cause accidents.

2, the correct approach

According to the housing area, according to the design of a professional electrician, and then integrate the actual number of household electrical appliances, reasonable placement of the power plug, and leave some plugs to use, in order to facilitate expansion.

Third, the water pipe connection is not standardized

1, wrong consequences

It is a common mistake for water pipe construction that the pipes are not regular, the pipes are bent and the pipes are all underground. Many people think that the connection of water pipes does not need to be too elaborate, but the possibility of connecting water pipes arbitrarily increases the probability of leakage of pipes, which is even more detrimental to future maintenance.

2, the correct approach

First of all, the connection of water pipes can not be arbitrary, must be done in accordance with the construction specifications, the direction of the water pipes must have a certain rule, go to the general parallel with the wall, try to avoid a certain angle between the water pipe and the wall; In addition, the direction of the water pipe should avoid the wires In order to prevent water leakage from touching the circuit and causing danger, when laying waterways, the water pipes must be connected by joints. The general elbows are all at 90 degrees. In addition to the ground, the waterway can also be placed in ceilings. Easy to repair.

Fourth, the circuit connection is not standardized

1, wrong consequences

The safety of the circuit is critical, and circuit construction must be guaranteed. In the circuit transformation, strong and weak electric co-management, repetitive wiring, direct burying of wires without bushings, and free installation of socket leads are four common mistakes. These errors not only make it easy to cause circuit failures, but may also cause electric shock and potential fire accidents.

2, the correct approach

The correct method of circuit reconstruction is that strong and weak electricity should be routed separately. It is forbidden to share one pipe and one bottom box for strong and weak electricity. The parallel distance of strong electricity lines should not be less than 3cm, preferably 50cm; the line should be made “live line”. , In the case of no more than 40 percent of the capacity of the pipeline, the same direction of the wire is placed in a tube; the outside of the wire must be protected by an insulating sleeve, the connector cannot be exposed; the wiring follows the "fire line into the switch, zero Line into the lamp" principle, outlets need to set leakage protection device.

Fifth, wiring, piping without leaving drawings

1, wrong consequences

The renovation of the house is a process of continuous improvement. Sometimes it may take a few years to re-appropriate the renovation. At this time, there must be an arrangement of wires and pipes. Otherwise, when the air conditioner is to be installed later, when the air conditioning hole is to be used, if there is no wiring diagram, the electric wire and the water pipe may be damaged.

2, the correct approach

After the completion of the hydropower reform, the water electrician should be asked to draw a detailed hydropower reform map, indicating the location of important nodes, for future reference.

Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).

Decoration construction knowledge hydropower reform

Gabion Mesh 


Gabion mesh including : heavy gabion/hexagonal mesh, Gabion Box, gabion mesh sack, welded gabion mesh, Prevention rockfall Mesh.

Gabion mesh's production processes : material inspection- PVC coating- machine weaving- alignment- cutting- edge strengthening- assembly- packing- transporting 

The material of gabion mesh is low carbon Steel Wire, and then will be hot-dipped galvanized, re-plated with Galfan or PVC, so as to improve the durability of the gabion mesh under all sorts of environments.


Applications of gabion mesh :

It has the effect of controlling water capacity, prevent soil and water from flowing,the protecting and improvement of the ecological environment. Gabion can be employed in a variety of ways to stabilize soil conditions around bridges and river bank protection. 


gabion mesh

Gabion Mesh

Gabion Mesh,Gabion Box Mesh,Gabion Garden Mesh,Gabion Mesh Wall,Gabion Box

ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scfiltermesh.com