Must-see, how to place the monitor is very important to your health

Today, almost all office workers use computers at work. After working at a computer all day long, many people will feel no pain or ailments at night. With regard to how to rationalize and arrange the work before the computer to avoid health problems, Russian clinical medical experts put forward many effective suggestions.
â—† 1. Working in front of a computer is a sitting lifestyle. This means that muscles do not get exercised while working. This seated lifestyle can easily damage the neck and back. If the work arrangements of office workers are unreasonable, the situation will be even worse. It is very important that office workers should install adjustable monitors. Such a monitor is adjusted to adapt to each person's different physiological characteristics. It can also be rotated in any direction, and its height and display curvature can also be adjusted.
â—† 2. If the monitor is slightly to the left, it will make the muscles on the left neck tight and the muscles on the right stretch. This kind of imbalance will lead to a right deviation of the head. Therefore, the computer monitor in the office must be placed along the midline. In other words, the display must be placed directly behind the keyboard, because the keyboard's centerline must be consistent with the display and the human body's midline.
â—† 3. It is also important that the monitor cannot be mounted too high or too low. The starting line on the display must be at the same level as your eyes. If the user must frequently look at the keyboard or the paper on the table, the starting line of the display should be turned down again.
â—† To test if the monitor is properly installed, you only need to do a simple test. First of all, remember the point on the monitor you want to see often, then close your eyes. Slowly do several head up and down movements. When the head moves to the position you feel comfortable, stop motionless and open your eyes. If the monitor is properly installed, your eyes will just freeze at the point you previously noted.
â—†5. The paper to be used in the work must be placed on the same distance, height and angle as the computer monitor. To do this, you can use a gantry, but the gantry must be fixed near the monitor and stay at the same level as your eyes. If you want to print the entire article on paper, put the paper in the right place, or put it on the stand between the monitor and keyboard, this method will bring you a lot of convenience.

â—† 6, usually, at work, you must frequently look at the monitor, then look at the keyboard, and then back to the monitor, so repeatedly, one day, you will feel a bad neck pain. To avoid this situation, you can install a keyboard that suits you. Recently, many new models for information output and input have been patented worldwide. Among them, there is a keyboard placed vertically next to the display, and a pyramidal keyboard. The keys on the keyboard are vertically designed.

â—† 7, even without these technological innovations, every person who uses a computer can find a way to avoid that situation. The keyboard is placed at an angle lower than the front end. Also, the keyboard must be lower than the user's elbow, so that the elbow fold angle must be at least 90 degrees or slightly larger.

Here we see that a user-friendly design of the display is particularly important, but fortunately, the monitor design is now focused on humane. Take the LCD monitor Samsung as an example. Samsung not only transplanted the MB technology on its LCD products, but also its unique design. For example, the 3U-designed X series is unique in its three ultra-narrow, ultra-thin and ultra-light technologies. This design not only makes the display more concise and beautiful, but also saves the user's desktop space. The 172X also has a dual-axis base. The design of this base allows consumers to freely adjust the screen height and elevation angle, and even fold it up. In addition to the ultra-narrow bezel, the Samsung N Series, T Series, and P Series monitors also feature vertical screen rotation. This function allows the user to freely adjust the viewing angle and is handy for text manipulation or web pages and pictures. The narrow bezel design makes the Samsung LCD display very convenient for multi-screen display; the built-in MB adjustment function allows the user to switch between display modes according to the application environment and enjoy comfort.
For people using computers, pay attention to the following 5 points:
â—‡ 1. The monitor should not be placed too low and must remain in the same level as the eyes.
â—‡ 2. Do not lower your elbows below the tabletop.
â—‡ 3. The keyboard should not be placed too far away from the hand. It is important that the elbow and the shoulders are level.
â—‡ 4. The seat should not be too low, do not oppress the knee below.

â—‡ 5. Do not use your computer to bend your knees. Put your feet under the seat. Put the entire foot flat on the ground.

For more information, please visit:      Customer service hotline: 400-6705-676 24- hour technical consultation: Yangzhou 18688991784 QQ

PE Plastic Rodfull name is Polyethylene Rod.

Physical properties: PE  plastic Rod is the most simple structure of the macromolecular organic compounds, the world's most widely used polymer materials, composed of ethylene polymerization, depending on the density is divided into high density polyethylene Rod, medium density polyethylene and low density polyethylene.


Classification of PE Rod
(1) LDPE Rod
       Low density polyethylene Rod (also known as high pressure polyethylene Rod)
       
(2) LLDPE Rod
       Linear low density polyethylene

(3) MDPE Rod
       Medium density polyethylene
       
(4) HDPE Rod
       High density polyethylene (also known as low pressure polyethylene)


 (5) UHMWPE Rod 

      Ultra high molecular weight polyethylene

 (6)Modified polyethylene Rod
      Chlorinated polyethylene (CPE) and crosslinked polyethylene (PEX)

 (7)Ethylene - ethylene copolymer
     Ethylene/propylene copolymer (plastic), EVA, ethylene, ethylene butene copolymer - other olefins, such as octene POE, cyclic olefin copolymer, ethylene/unsaturated ester copolymer (EAA, EMAA, EEA, EMA, EMMA, EMAH).
Polyethylene, which has a molecular weight of 3 million to 6 million, is known as UHMWPE.

Ultra high molecular weight polyethylene Rod is very strong and can be used for body armor.


Applications:
1. Papermaking industry: suction box board, scraper, molding plate, bearing, gear;
2. Mining industry: charging barrel, abrasive and adhesive-resistant back lining for warehouses;
3. Chemical industry: acid pump, filter plate, worm gear, bearing;
4. Food industry: packing machinery parts,   bottle guide, screw, wear plate, slide way, stud weld, roller and other transmission parts;
5. Textile industry:buffer board;
6. Food processing industry: chopping block, refrigerating plant;

7. Wharf: anti-collision board.


Advantages: 
1. Acid and alkali resistance, resistance to organic solvents 
2. Excellent electrical insulation and static resistance
3, Can still maintain a certain touness even at low temperature
4. Extremely high impact strength
5. Low friction coefficient
6. Non-toxic
7. Low water absorption
8.Lower density than any other thermoplastic plastics (<1g/cm3)

 Disadvantages:
 PE Plastic Rod have Weak mechanical property, air permeability, easy deformation, easy ageing, brittle, brittle less than PP, easy stress cracking, surface hardness, easy to scratch.
Difficult to print, in printing, surface discharge treatment, cannot electroplating, the surface has no luster.
       
       
Specification: the diameter of the PE rod can be produced from 2mm to 250mm. The conventional length is 1000mm, and the length is unlimited.
The thickness of PE Rod material can be produced from 0.3mm to 1.9mm, the normal width is 600mm, the width cannot exceed 1200mm, the length is not limited.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 1000mm* 2000mm, and the commonly used specification of10-180mm is 600*1200mm.PE Rod can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited
 

Color: natural color is wax white, also can be customized black and color, the order of the color to order is 500KG.


Modified varieties: PE sheet/rod can be added to the fiberglass, copper powder and molybdenum disulphide to enhance the bar.
Add antistatic agent to the permanent antistatic electric bar, and the volume resistance value is between 6 to 9 power of 10.Add flame retardant to the flame retardant rod from UL 94V-0 to HB flame retardant grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.


Combustion characteristics:

Combustion situation: easy

Combustion flame status: molten drop, yellow lower blue

After the fire: continue to bur

Smell: the smell of wax burning

    

 Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.

Pe Plastic Rod

Pe Plastic Rod,Polythene Rod,Polyethylene Pipe,Pe Rod Pipe

Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com