Xiamen Golden Heron: High-efficiency aluminum alloy processing end mill series debut DMC2010
The 13th China International Mould Technology and Equipment Exhibition (hereinafter referred to as China International Mould Exhibition) co-sponsored by China Mould Industry Association and Shanghai International Exhibition Co., Ltd. was held in Shanghai from May 11 to 15, 2010. Organized by the International Expo Center. The theme of this year's exhibition is "The whole industry equipment procurement and exchange platform for precision processing and manufacturing". Sandvik Coromant, Da Zhaohe, Zhuzhou Diamond, Xiamen Golden Heron and other well-known tool fixture companies at home and abroad have brought their latest products to the show. Mold exhibition.
Xiamen Jinlu Special Alloy Co., Ltd. also participated in the exhibition with its latest tool series products. The engineers at Xiamen Jinlu site specially introduced the main products of the exhibition for the Chinese metal processing online reporter--high-efficiency aluminum alloy processing end milling Knife series.
High-efficiency aluminum alloy machining end mill series designed and manufactured for the machining of aluminum alloy parts in the aerospace industry. The tool is made of ultra-fine grained carbide and has the most suitable tool structure and knife design, combined with excellent manufacturing process; meets the stringent requirements of the aerospace industry for high precision and high efficiency machining. This tool is mainly used for cavity machining and side milling of aluminum alloy parts such as 7075 and 7050.
Tool features: high strength of the tool body, dynamic balance performance up to G2.5, adapt to high-speed machining requirements; high metal removal rate, special tool design improves tool processing efficiency, metal removal rate up to 750cc / min. The large front angle improves the sharpness of the cutting edge and reduces the cutting resistance. The large chip flute design makes the chip removal smooth during processing. The sharp cutting edge and the R angle arc are suitable for the application. The surface finish of the knife in the processing can reach Ra0.8.
Plywood is the basic wooden product for furniture, is one of the biggest wooden products, is used for plane, boat, train, bus, construction and package etc. It is the one of the main way to save wood resource and improve the usage of wood.Usually poplar, pine, combi, hardwood as the core, the bace&back are the Veneer surface, such as Okoume, Bintangor, Pine, Birch, Poplar, Pencil cedar, Maple, Cherry, White Oak, Sapele, Beech, Red Oak, Ash etc.
LULI Group Corp. Ltd, well known as the leading manufacturer for wooden, steel and paper products, located in Shouguang, Weifang, Shandong, China. Since the foundation in 1985, it focus on the production of plywood, venner, MDF , Particle board, Door Skin, Blockboard, Finger joint board, OSB , paper, Steel etc. And we have High Quality Plywood.
Advantages:
1.High bending strength
2.Strong nail holding
3.Moisture-proof and easy work
4.Tight construction and high strength
5.No ratten or decay
6.Low formaldehyde emission
7.The productions are suitable for the construction of viaduct and tall frame building
8.If put in boiling water for 48 hours,it still glue sticking and still formed
9.If used abide by illustration strictly,it can be reuse more than 50 times
10.Solve the problem of leaking and rough surface during construction process.Particular suiltable for watering concreat.
The details of Plywood:
size:1220*2440mm 1220*3000mm 915*1830mm 1250*2500mm, according requirement
thickness:2mm-60mm
core:poplar/combine/hardwood
glue:MR/E2/E1/E0/melamine/WBP
kinds:okoume,bintangor,pine,birch,poplar,cedar,ect.
certification:CARB,FSC,CE,JAS,ISO9001,ISO14001
Plywood
Commercial Plywood,Plywood Sheet,18mm Plywood,Plywood Prices
Luli Group Co.,Ltd. , http://www.cnluli.com