Tile selection method
When you are decorating your home, you should buy ceramic tiles. How to buy valuable and satisfactory ceramic tiles also has certain knowledge. In general, the principle of purchasing ceramic tiles is: one look, two listeners, three drops of water, and four feet.
First, look at the appearance. The color of the tiles should be uniform, the surface finish and flatness should be good, the surrounding rules and patterns should be complete, and four or five pieces should be taken out from a box to see if there are any defects such as color difference, deformation, lack of edges and corners.
Second, listen to the sound. When tapping with a hard object, the crisper the sound, the higher the degree of porcelain and the better the quality. You can also use the left thumb, forefinger and middle finger to clip the corner of the tile and hang it down easily. Use your right index finger to tap the middle and lower part of the tile. For example, the sound is clear and pleasing to the top, such as dull sound and turbidity.
Third, the dripping test. The water droplets can be placed on the back of the tile to see how fast the water is infiltrated. Generally speaking, the slower the water absorption, the greater the density of the tile; on the contrary, the faster the water absorption, the thinner the density, and the inherent quality is superior.
Fourth, the amount. The higher the accuracy of the length of the tile, the better the effect after the paving. Buying high-quality tiles is not only easy to construct, but also saves working hours and accessories. Use a tape measure to measure the size of each tile around the difference, the highest accuracy is the top grade.
In addition, the hardness of the tile was observed, and the tile was excellent in hardness, toughness, and not easy to be broken. Scrub the edges of the tiles with each other to see if the broken pieces are fine or loose, hard, brittle or soft, leaving scratches or scattered powder. If the former is the top, the latter is the quality. difference.
Whether the size is the standard is the key to judging the advantages and disadvantages of the tile. Use the tape measure or caliper to measure the diagonal and the four sides of the tile and the thickness is uniform. The good tile, the sound is crisp, indicating that the porcelain content is high. If the sound "å—’å—’" is broken, it means that there is a crack in the brick.
Good tiles, the master is also easy to install, and the effect of installation is also standardized.
Related Reading:
Ceramic wall tile quality appraisal 7 method
Ceramic glazed tiles are mostly rectangular in shape and can be erected when used to increase the visual height after decoration. There are various specifications such as 60 mm × 240 mm, l00 mm × 200 mm, 1l5 mm × 240 mm, 150 mm × 200 mm, 150 mm × 225 mm, 200 mm × 300 mm, and the thickness is between 6 and 10 mm. Can be selected as needed.
5 steps before purchasing tiles
The first step: determine the style: Before choosing the tile, first of all, we must examine the design style of the room. According to the intensity of the room lighting and the size of the room, we decide to choose the color and pattern of the tile. Generally, the narrow room is suitable for the use of monochrome floor tiles.
How to choose what high tricks
Tiles are mainly used in the living room, kitchen, bathroom wall and floor. Because the living environment in these places is very different. For example, the wall of the kitchen is often infested by soot. Therefore, the wall tile must have the characteristics of anti-oil and scrub resistance, and the floor tile of the bathroom should have anti-slip function. The tile with low water absorption should be considered.
Knowledge of tile maintenance
Tea stains, fruit stains, coffee, sauce vinegar, leather shoes and other stains use sodium hypochlorite dilution (bleach), soak for 20-30 minutes after use, wipe with a cloth; some infiltration into the brick for a long time, soaking time a couple of hours.
Name resolution of tile surface quality defect terminology
Chromatic aberration: There is a difference in the color of the front of the same piece or the same set of products. No matter whether it is GB/T4100-1999 or GB/T4100-2006, there is no clear regulation for chromatic aberration. Only the measurement standard of small chromatic aberration (GB/T3810.16) is specified, and this standard is only used for monochrome in specific environments. There are glazed tiles.
Tile classification and purchase method
Tiles are divided into floor tiles, wall tiles and waist line bricks according to their functions.
Floor tiles: divided into imitation Spanish bricks, vitrified polished tiles, glazed tiles, non-slip tiles and bleed polished tiles.
Wall tiles: according to the color can be divided into vitrified wall tiles, printed wall tiles
Gw Series Rebar Bending Machine , reasonable design, simple structure and can bend steel rod diameter to any required shape applying to bridge, tunnel and small, medium as well as large construction projects.
1.Simple operation, safe and durable, high quality copper wire motor, guarantee a more stable performance.
2.Enclosed gearbox lubrication, worm gear and worm drive, with speed adjustable gear, strong bending strength, not rebound.
3.Ultra-high hardness accessories, adjustable baffle which guarantee a longer service life.
4.Machine surface adopts plastic-spray treatment, disc, long strips are solid and forged, chrome plated, beautiful and generous.
We can customize GW65 Rebar Bending Machine according to customer's requirement.
GW Series Rebar Bending Machine
Gw Series Rebar Bending Machine,Deformed Rebar Rod Bending Machine,Used Rebar Bending Machine,Steel Bar Bending Machine
BAODING JINDI MACHINERY CO., LTD , http://www.rebarconnector.com